TOPBMS lithium iron phosphate battery, 12V4S, 24V8S protection board, 100A, lead-to-lithium conversion Battery Management System BMS 4S 8S 100AH

NOTE:

This device must be installed by a certified technician with proper knowledge of the installation procedure.

New low internal resistance MOSFET

It can provide lower voltage drop and higher current transfer capability in the on state, effectively reducing power consumption, improving efficiency, and reducing heat loss.

Parameter information

Ubisoft and Lithium

Protect your battery safety

Lithium iron phosphate parameters

Overcharge protection

Detection voltage: 3.70±0.05V

Detection delay: 1000±500MS

Release voltage: 3.5±0.05V

Over discharge protection

Detection voltage: 2.30±0.1V

Detection delay: 1000±500MS

Release voltage: 2.7±0.1V

Equalization function

Detection voltage: 3.50±0.05V

Detection delay: 100±50MS

Equalizing current: 35±5mA

Overcurrent protection

Detection voltage: 50±15MV

Detection delay: 1000-500MS

Short circuit protection

Triggering condition: External load short circuit

Detection delay: 250/960

Release condition: Disconnect load/charge

Temperature control protection

Operating temperature: 75±5°C

Release condition: Recover within the operating temperature range

self-consumption

Operating power consumption: ≤40UA

Over-discharge power consumption during hibernation: ≤10UA

Operating temperature range: -20/+80℃

The above data is from random sampling by the R&D department of Youbao Technology and is for reference only. Please refer to the actual product parameters.