The New FT2232HL Development Board FT2232H USB Interface

₦ 47,552

₦ 81,77642%

1 units left

+ shipping from ₦ 9,072 to LEKKI-AJAH (SANGOTEDO)

0 out of 5

(No ratings available)

Promotions

Call 07006000000 To Place Your Order Need extra money? Loan up to N500,000 on the JumiaPay Android app. Enjoy cheaper shipping fees when you select a PickUp Station at checkout.

Report incorrect product information

Delivery & Returns

Shipped from abroad

Choose your location

Pickup Station

Delivery Fees ₦ 9,072

Ready for pickup between 24 July and 28 July if you place your order within the next 18hrs 13mins

Door Delivery

Delivery Fees ₦ 10,032

Ready for delivery between 24 July and 28 July if you place your order within the next 18hrs 13mins

Return Policy

Free return within 7 days for ALL eligible itemsDetails

Warranty

None

Seller Information

JG-Sunnyshy

86%Seller Score

172 Followers

Seller Performance

Shipping speed: Good

Quality Score: Good

Customer Rating: Excellent

Product details

Detailed Information About The Product:

Name：The New FT2232HL Development Board FT2232H USB Interface Is Compatible with UART / JTA OpenOCD
You can use FT2232HL to convert from USB to multiple interfaces, such as UART/SPI/JTA/I2C, etc.
Overall dimensions (length x width x height) : 103 x 45 x 14 mm; PCB size (length x width x thickness) : 95 x 45 x 1.6mm
Power supply: +5V, which is connected to CN3 through USB square cable.
All functional pins are drawn out, making it easy to use dupont wire to connect peripheral modules.
The signal pins of CN3 and CN4 are added with ESD protection circuit.

[ description ]
CN1:2.54mm spacing 1 x 20 Pin single row
CN2:2.54mm spacing 1 x 20 Pin single row
CN4:2.54mm spacing 2 x 10 Pin double row simple Angle holder
The spacing between CN1 and CN2 is 1400mil, that is, 14 x 2.54=35.56mm
[simple usage steps]
LED1 is the power on indicator light. After the power is supplied, it stays on.
After installing its drive CDM21228_Setup, FT2232HL defaults to USB to dual serial ports.
Using PC serial debugging software can easily test these two serial ports.
Just use two dupont wires to cross connect the serial ports:
ADBUS0 (TXD) and BDBUS1 (RXD)
ADBUS1 (RXD) and BDBUS0 (TXD)
U7 (74HC573) is connected to BDBUS for driving LED for signal indication.
Some LED flashes are normal when the board is charged.
When BDBUS is used as a serial port and opened, the red light in LED5 is always on, which is the indicator of hardware flow control, which is a normal phenomenon.
The board 93LC56 EEPROM is not in use, so it is indicated as BLANK DEVICE.
Condition: New
Type: Drive IC
Model Number: FT2232HL
Supply Voltage: 5V
Application: Computer
color:As shown
Material:plastic

Package Contents:
1 x FT2232HL Development Board Kit

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.