TB6600 4A 9-42V Stepper Motor Driver CNC Controller With Stepper Moto

Detailed Information About The Product:

Motor Driver: 9V-42V DC power supply H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current.
Motor Driver: Energy-saving semi-automatic current lock function built-in temperature protection and over current protection.The largest 32 subdivision of the 6 models are optional.
Stepper Motor: 40Ncm holding torque; Rated current 1.7A and resistance 1.5ohms; 1.8 deg. step angle; bipolar 4-wire.
Tips:Please make sure the motor connect to a constant current or chopper drive controller before you test motor.Connecting the motor directly to a power supply will destroy the motor.Only the clock pulse signal can be driven two-phase bipolar stepper motor to achieve low vibration high efficiency work.
TB6600 Stepper Motor Driver:
Single chip bipolar sine microstep stepper motor driver.
New BiCD 0.13 nm process.Up to 42V.
5 subdivision mode options1/11/21/41/81/161/32.
Output current:IOUT=4.0Apeakin 100ms.
rated output:IOUT=3.5 A
Resistancea+=0.4
Alarm output pin current:Ialert=1mA
Monitoring output pinMO:Imo=1mA
Break through the traditionalsingle power supply.
Built in overheating protectionTSDcircuit.
Undervoltage protectionbuilt-inUVLOcircuit.
Built-in overcurrent detectionISDcircuit.
Can control 2 phase stepper motor forward and reverse rotationWith 1-2W1 -22W1 -24W1 -2 phase excitation mode.
Nema 17 Stepper Motor:
Motor type:Bipolar Stepper
Phase Resistance:1.5Ohm
Phase Inductance:2.8mH
Detent Torque:2.2N.cm
Rotor Inertia:54g.cm2
Holding Torque:40N.cm
Step angle:1.8 deg
Motor Weight:280g
Step angle accuracy:+ -5%full stepnot load
Resistance accuracy:+ -10%
Inductance accuracy:+ -20%
Temperature rise:80deg Maxrated current2 phase on
Ambient temperature:-20deg-+50deg
Insulation resistance:100MΩ Min500VDC
Insultion Strength:500VAC for one minute
Connection:RedA+GreenA-YellowB+BlueB-
colour:Black+silver
Material:ABS+metal
Package Contents:
1 * TB6600 Motor Driver
1 * Nema 17 Motor
1 * Mounting Bracket
4 * M4 Screws
4 * M3 Screws
2 * Inner agon Spanner
Only the above package content other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best pricewe support Wholesale/Drop Shipping Order
1. For Drop Shipping order please remark"dropshipping order" we will prioritize it.
2. For Wholesale/Drop Shipping orders if you have any ideas about the price or packageplease contact us in advancewe will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the orderplease contact us in advance we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your packageplease don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !