Swing adjustable arm-swing floor lamp

swing-armswing-arm floor lamp**, often referred to as an "architect" or "task" floor lamp. This style is characterized by its adjustable, multi-jointed arm, which allows the user to direct light precisely where it is needed, making it ideal for reading or focused workspaces.

While the specific brand and model cannot be identified from the image alone, here is the standard information typically associated with this type of lighting fixture.

### Feature Highlights

* **Adjustable Reach:** The multi-pivot arm design allows you to extend, lower, or tilt the lamp head to suit different tasks and heights.
* **Focused Illumination:** The dome-shaped shade directs light downward, minimizing glare and creating a concentrated pool of light perfect for desks or reading chairs.
* **Stability:** Features a weighted circular base that provides the necessary counter-balance to support the extended arm without tipping over.
* **Versatile Design:** The minimalist, industrial aesthetic fits well in home offices, bedrooms, or living areas.

### General Assembly & Setup Instructions

1. **Unpack:** Carefully remove all parts from the packaging. You will typically find the base, the main pole segments, the lamp arm assembly, and the shade.
2. **Base Assembly:** Secure the main pole into the weighted base. Ensure it is tightened firmly so the lamp does not wobble.
3. **Attach Arm:** Insert the swing-arm assembly into the top of the pole. Most models use a tension screw or a simple drop-in mechanism.
4. **Install Bulb:** Ensure the lamp is unplugged. Screw in a compatible light bulb (check the socket for the maximum wattage rating—usually labeled as "Max 40W" or "60W"). LED bulbs are highly recommended for these lamps to keep the shade cool.
5. **Placement:** Position the lamp on a level surface, near an outlet, and adjust the joints to your desired height and angle.

### Maintenance & Care

* **Cleaning:** Dust the lamp regularly with a soft, dry cloth. For the metal finish, avoid harsh chemical cleaners, as they may damage the paint or coating. A slightly damp cloth can be used for stubborn spots, followed by an immediate wipe-down with a dry cloth.
* **Tightening Joints:** If the arm becomes loose and does not stay in the position you set, look for the tension knobs or screws at the joints. Tighten them slightly by hand or with a screwdriver as needed.
* **Electrical Safety:** Always unplug the lamp before changing the light bulb or performing any maintenance. Inspect the cord periodically for any fraying or damage; if the cord is damaged, stop using the lamp immediately.
* **Bulb Replacement:** Only replace bulbs with those that match the recommended wattage and base type (e.g., E26 or E27) to prevent overheating.

---