Stepper Driver With Heat Sink Motherboard Mute Direct Drive Extruder

Detailed Information About The Product:

multicolor and high quality. Suitable for Genius Pro/SW-X2/Hornet 3D printer used.
Ultra-quiet operation good heat dissipation
Low-speed silent high-speed anti-shake
Two-color pin header stable performance
Large area heat dissipation lower temperature. The driver is equipped with a heat sink to assist the driver to dissipate heat and increase the heat dissipation area. The heat of the driver chip can be quickly discharged through the heat sink which greatly reduces the temperature of the driver during operation which is beneficial to the normal operation of the printer and prevents steps and stops working.

1. Hardware compatible with StepStick and Pololu A4988
2. Drive capability up to 2.5A
3. Step/Dir interface with microstep interpolation up to 256 microsteps
4. Motor voltage:4.75V-32V
5. Logic voltage: 3.3V and 5V
Precautions for use:
1. Please pay special attention to the drive direction do not insert it backwards!
2. When measuring voltage be sure not to connect the motor otherwise it is easy to burn the drive.
3. When measuring the voltage the power should be turned on. Don't just connect the USB powered by.
4. Before adjusting the knob it must be done with the power off. After the adjustment is completed perform a power-on test to prevent the driver or the motherboard from burning out.
5. When attaching the heat sink please pay attention to the distance between the heat sink and the pins otherwise it will cause a short circuit between the heat sink and the pins.
6. When the drive is working please do a good job of heat dissipation heat sink + cooling fan to prevent abnormal operation of the drive due to overheating.
Colour:as described
Material:PCB+Metal

Package Contents:
1 * Stepper Driver

Only the above package content other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best pricewe support Wholesale/Drop Shipping Order
1. For Drop Shipping order please remark"dropshipping order" we will prioritize it.
2. For Wholesale/Drop Shipping orders if you have any ideas about the price or packageplease contact us in advancewe will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the orderplease contact us in advance we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your packageplease don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !