STC-1000 Digital Temperature Controller With Waterproof Probe 220V, Dual Relay Thermostat, Cooling And Heating

Connect the heater and cooler at the same timeNo need to change the wiring between the heater and the cooler frequently. This temperature controller with sensor has 2 relays. Compared with other 1 relay temperature controllers, you can wire 2 devices (heating and cooling) at the same time. Please note that there are no sockets, wiring required.

Keep the temperature in the desired rangeThis is the on/off control mode. Control the temperature by adjusting the temperature setting and the difference, the heating and cooling mode can be automatically switched. Make full use of the stc microcontroller and NTC probe to make this temperature controller have high accuracy.

High precisionMade of sturdy and anti-flame retardant ABS plastic shell with integrated structure, this dual relay digital thermostat is safe and energy-saving. Power consumption: ≤3W, Temperature control range: -50℃~99℃, Accuracy: ±1℃, Power supply: 110-220Vac 50Hz/60Hz, Output: 2 relays, Cool/Heat (10A/250Vac).

MultifunctionalThis incubator thermostat supports temperature calibration, compressor delay protection, alarm when temperature exceeds temperature limit or sensor error, all parameter settings can be saved after restart.

2m Waterproof ProbeThis digital temperature controller can be used in humid and water environment. Such as aquarium, seafood machine, aquaculture, hatchery, terrarium, vivarium, seedling heating mat, incubator, brewing, freezer, water tanks, refrigerator, industrial chiller, fermentation, industrial equipment, etc.

Specification:

Temperature control range: -50 ~ +99 °C

Difference set value: 0.3 ~ 10 °C

Accuracy: ±1 °C

Measuring input: 2m waterproof probe

Power supply: 220VAC 50 / 60Hz

Output relay: Two Cool 10A / 250VAC relays; Heat 10A /250VAC

Size: 75mm * 34mm * 85mm

Power consumption: ≤3W