Square Single-Head Recessed COB LED Downlight Spotlight (White Finish)

High-Voltage Safety Warning

Always switch off power at the main electrical breaker box before installing, inspecting, or servicing wired light fixtures.

Product Name

Square Single-Head Recessed COB LED Downlight Spotlight (White Finish)

Product Description

Brighten up modern residential and commercial interiors with this clean square single-head recessed COB LED spotlight. Featuring a powder-coated matte white aluminum bezel and a high-output COB LED light engine, this architectural fixture provides clear, focused downlighting. The deep-set diamond-patterned reflector cup maximizes light distribution while keeping visual glare to a minimum. Equipped with two heavy-duty spring clips with orange protective sleeves, it seamlessly installs flush into drywall, drop ceiling panels, or plasterboard cutouts.

Feature Highlights

Sleek White Bezel: Clean matte white powder-coated housing blends invisibly into standard white ceilings.

COB LED Efficiency: Delivers intense, uniform brightness with low energy consumption and long operating life.

Anti-Glare Faceted Reflector: Deep-set silver optics focus the beam precisely while shielding eyes from direct visual strain.

Spring-Loaded Retention Clips: Two heavy-duty mounting clips with orange protective sleeves ensure a tight, tool-free flush installation.

Aluminum Finned Heat Sink: Heavy-duty rear heat sink ensures optimal thermal management to protect internal components and extend LED lifespan.

1.Power Off:Safety Prerequisite.

Shut off the main electrical circuit breaker to completely de-energize the circuit before handling any electrical wiring.

2.Prepare Ceiling Cutout:Preparation.

Mark and cut a square or circular ceiling opening matching the specified cutout dimensions for the single-head unit.

3.Wire the LED Driver:Electrical Connection.

Connect the incoming AC power supply lines to the fixture's LED driver inputs (Live to Live, Neutral to Neutral, and Ground to Ground) using secure terminal connectors.

4.Mount Into Ceiling:Physical Installation.

Pivot both spring retention clips upward against the sides of the fixture, press the unit into the ceiling cutout, and release the springs to clamp the bezel flat against the ceiling.

5.Restore Power & Test:Verification.

Switch the circuit breaker back on and flip the switch to verify the spotlight illuminates smoothly without flickering.

Maintenance Guidelines

Routine Dusting: Dust the white square faceplate regularly using a clean, soft microfiber cloth.

Lens Care: Wipe the reflector cup and glass lens gently with a dry or slightly dampened lint-free cloth.

Avoid Harsh Solvents: Never use abrasive pads, chemical sprays, or harsh detergents on the powder-coated finish.