This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeHome & OfficeLarge Appliances & Home ImprovementHome Improvement HardwareSpeed Sensor Module Tacho Sensor Slot-type Optocoupler Tacho-generator Counter Module for Diy Kit
/product/43/9767572/1.jpg?7492)
/product/43/9767572/2.jpg?7492)
Share this product
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees ₦ 5,061
Ready for pickup between 12 June and 16 June if you place your order within the next 28mins
Door Delivery
Delivery Fees ₦ 5,821
Ready for delivery between 12 June and 16 June if you place your order within the next 28mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Seller Information
housewaresstore
76%Seller Score
4 Followers
Seller Performance
Shipping speed: Poor
Quality Score: Excellent
Product details
Description:
Use Module:
1. The Module Slot Is Smooth, The Receiver Tube Conduction Module DO Output Low Level, When Blocked, The DO Output High Level;
2, The DO Output Interface Can Be Directly Connected With The IO Port Of The Microcontroller, Whether With Fence Sensor, Such As Motor Speed, Etc. Can Be Detected By Motor Ener.
2, DO Module Can Be Connected To Relay, Limit Switch And Other Functions Composition, Can Be Connected To Active Buzzer Module, To Form Alarm.
Features:
1, Using Imported Groove Coupling Sensor, Groove Width 5mm.
2, Output Status Indicator Light Output Highlight, Output Low Light.
3, Block, High Output; No Shelter, Low Output.
4, The Comparator Output Signal Is Clean, The Waveform Is Good, The Driving Capacity Is Strong, Greater Than 15mA.
5, Working Voltage 3.3V-5V
6, Output Format: Digital Switch Output (0 And 1)
7, Fixed Bolt Hole For Easy Installation
8, Small PCB Board Size: 3.2cm x 1.4cm
9, Using Wide Voltage Comparator LM393
Product Wiring Instructions:
1, VCC Positive Power Supply 3.3-5V
2, GND Power Negative
3, DO TTL Switch Quantity Signal Output
4, AO This Module Is Not Working
Use Module:
1. The Module Slot Is Smooth, The Receiver Tube Conduction Module DO Output Low Level, When Blocked, The DO Output High Level;
2, The DO Output Interface Can Be Directly Connected With The IO Port Of The Microcontroller, Whether With Fence Sensor, Such As Motor Speed, Etc. Can Be Detected By Motor Ener.
2, DO Module Can Be Connected To Relay, Limit Switch And Other Functions Composition, Can Be Connected To Active Buzzer Module, To Form Alarm.
Features:
1, Using Imported Groove Coupling Sensor, Groove Width 5mm.
2, Output Status Indicator Light Output Highlight, Output Low Light.
3, Block, High Output; No Shelter, Low Output.
4, The Comparator Output Signal Is Clean, The Waveform Is Good, The Driving Capacity Is Strong, Greater Than 15mA.
5, Working Voltage 3.3V-5V
6, Output Format: Digital Switch Output (0 And 1)
7, Fixed Bolt Hole For Easy Installation
8, Small PCB Board Size: 3.2cm x 1.4cm
9, Using Wide Voltage Comparator LM393
Product Wiring Instructions:
1, VCC Positive Power Supply 3.3-5V
2, GND Power Negative
3, DO TTL Switch Quantity Signal Output
4, AO This Module Is Not Working
Specifications
Key Features
Description:
Use Module:
1. The Module Slot Is Smooth, The Receiver Tube Conduction Module DO Output Low Level, When Blocked, The DO Output High Level;
2, The DO Output Interface Can Be Directly Connected With The IO Port Of The Microcontroller, Whether With Fence Sensor, Such As Motor Speed, Etc. Can Be Detected By Motor Ener.
2, DO Module Can Be Connected To Relay, Limit Switch And Other Functions Composition, Can Be Connected To Active Buzzer Module, To Form Alarm.
Features:
1, Using Imported Groove Coupling Sensor, Groove Width 5mm.
2, Output Status Indicator Light Output Highlight, Output Low Light.
3, Block, High Output; No Shelter, Low Output.
4, The Comparator Output Signal Is Clean, The Waveform Is Good, The Driving Capacity Is Strong, Greater Than 15mA.
5, Working Voltage 3.3V-5V
6, Output Format: Digital Switch Output (0 And 1)
7, Fixed Bolt Hole For Easy Installation
8, Small PCB Board Size: 3.2cm x 1.4cm
9, Using Wide Voltage Comparator LM393
Product Wiring Instructions:
1, VCC Positive Power Supply 3.3-5V
2, GND Power Negative
3, DO TTL Switch Quantity Signal Output
4, AO This Module Is Not Working
Use Module:
1. The Module Slot Is Smooth, The Receiver Tube Conduction Module DO Output Low Level, When Blocked, The DO Output High Level;
2, The DO Output Interface Can Be Directly Connected With The IO Port Of The Microcontroller, Whether With Fence Sensor, Such As Motor Speed, Etc. Can Be Detected By Motor Ener.
2, DO Module Can Be Connected To Relay, Limit Switch And Other Functions Composition, Can Be Connected To Active Buzzer Module, To Form Alarm.
Features:
1, Using Imported Groove Coupling Sensor, Groove Width 5mm.
2, Output Status Indicator Light Output Highlight, Output Low Light.
3, Block, High Output; No Shelter, Low Output.
4, The Comparator Output Signal Is Clean, The Waveform Is Good, The Driving Capacity Is Strong, Greater Than 15mA.
5, Working Voltage 3.3V-5V
6, Output Format: Digital Switch Output (0 And 1)
7, Fixed Bolt Hole For Easy Installation
8, Small PCB Board Size: 3.2cm x 1.4cm
9, Using Wide Voltage Comparator LM393
Product Wiring Instructions:
1, VCC Positive Power Supply 3.3-5V
2, GND Power Negative
3, DO TTL Switch Quantity Signal Output
4, AO This Module Is Not Working
What’s in the box
1x packages
Specifications
- SKU: GE779IP4199O5NAFAMZ
- Production Country: China
- Size (L x W x H cm): 20x10x20
- Weight (kg): 0.3
- Color: multicolour
- Main Material: other
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
/product/43/9767572/1.jpg?7492)
Speed Sensor Module Tacho Sensor Slot-type Optocoupler Tacho-generator Counter Module for Diy Kit
₦ 23,490
₦ 32,94029%
Questions about this product?