Soudal Chemical Anchor CA1400

Chemical Anchor CA1400 is a high-performance, universally applicable 2-component anchoring resin for the tension-free securing of anchoring rods, studs, reinforcing bars, threaded collars, profiles etc. in structural and high-load applications, in both hollow and solid materials.

Very strong anchoring – suitable for loads up to 1400kg
Fast-setting – can be exposed to loads after 30 minutes
Can be applied with a standard caulking gun
Can be used even in wet or damp conditions
Cartridge reusable by changing mixing nozzle

FEATURES

• Suitable for very heavy loads
• Very fast setting – can be exposed to loads after 30 minutes
• Withstands temperatures up to 80°C
• Easy to use and apply
• Can be applied with a standard caulking gun
• Fast cure and styrene-free (low odour)
• Can be used even in wet drill holes
• Cartridge reusable by changing static mixer (nozzle)
• Watertight and impermeable fixing
• Indoor Emission LEvel (VOC) A+ (Very Low Risk)

APPLICATIONS

• Anchoring of metal rods, threaded bolts, metal profiles etc in solid stone, brick and concrete, and hollow stones and concrete.
• Especially suited for installing, even close to edges, of hedges, banisters, shutters, fences, etc.
• Also suitable as a repair mortar for damaged concrete parts.

APPLICATION INSTRUCTIONS

Thread mixing nozzle into cartridge. Can be applied with a normal high performance cartridge gun. Application temperature 5°C and higher. Discard the first 5cm of extruded product; the colour must be homogenuously grey which indicates correct mixing of the components. Remove nozzle and reseal after use.

Installation depends on the structure; may require sleeves. For more info, please check our application guide or contact us.