Smart RFID Car Alarm System Push Engine Start Stop Goodon Lo

Detailed Information About The Product:

Operating Instructions: Into the anti-theft: 15 seconds after each turn off the host 1, said the system has entered the anti-theft state, then start the button lights turn off, the whole car power, start operation is invalid..Exit the anti-theft: When the ID sensor card near the car in the induction coil area, this time the host tweeted 2, said the system has been revoked anti-theft, start button immediately power flash, the vehicle can start at any time.
A key to start: foot brakes, short start button 1 times after the release, that is, the vehicle automatically activated after 0.5 seconds.A key off: foot brakes, short the start button 1 times after the release, that is, the vehicle immediately turn off.A key to open the sound: do not step on the foot brake, short a key to start the button to open the sound, the function as the key hit the first file.
A key to open the instrument panel: do not step on the foot brake, has been opened on the basis of sound and then a key to start the button to open the instrument panel, then the instrument panel power, function as the key hit in the second file.
Parameters: Operating voltage: DC voltage DC = 12V, no support 24V power supply.Standby current: 8mA (Note: continuous standby up to a month).Button display: blue light (Note: in the flame- state of the blue light off, anti-theft after the anti-flash)Into the anti-theft: each time off the fire 15 seconds the system automatically locks the engine, the whole car off, the button lights off.
Exit the anti-theft: on the train using the ID card proximity sensor coil, the host tweeted 2 out of the anti-theft.Brake light output flashing voltage: DC = 12V (Note: the output time controlled by the foot brake).Brake light output form: each brakes after the first brake light flashing 4, and then long bright, loose feet off..Alarm: brake light alarm, when the car on the illegal brakes, the brake light flash alarm for 15 seconds.

Use Conditions: can be used for no remote control and no anti-theft models, such as caravans, small A0 car, after installation, the vehicle have a key to start and a key to turn off the function, dark lock anti-theft function, brake flash function and brake alarm function.
B: can be used for the installation of such as iron general anti-theft device, PLC alarm and the installation of ordinary anti-theft vehicles, the installation be more function protection, security greatly increased, but also has a key to start and a key off Function, dark lock anti-theft function, brake flash function and brake alarm function.
C: can be installed with the PKE smart keyless entry into the anti-theft device used to make the vehicle more intelligent and humane, but also has a key to start and a key to turn off the function, dark lock anti-theft function, brake flash function and brake alarm function
Note:
When the installation of a key to start plug the key screwed to the ACC file to restore the original car steering wheel lock, this time to the original car lock behind the ignition plug unplugged to prevent the key in the ACC file when the original car audio power
colour: Black
Material: ABS

Package Contents:
1 set * rfid smart engine start stop push button
1*English instruction manual

Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.