SI4732 V6.8 FPC Module+2x 2M Expansion Chip For Quansheng UVK5 K6 HF

Detailed Information About The Product:

SI4732 V6.8 Upgraded version! ! !
Using FPC 0.2mm thin board compared with the traditional fiber thick board PCB it reduces the parasitic inductance to the ground. And the speaker is not installed on top.
Using the on-board IPEX interface the board does not need to solder the feeder. In addition the top ground wire has a welding hole on the right side of the fixed position. The soldering iron can be soldered firmly with a light touch which greatly reduces the difficulty of installation and construction.
TVS transient suppression diode is added to suppress transient voltage and the parasitic capacitance of the protection component itself will destroy the impedance matching during the original signal transmission preventing the signal from distorted.
The internal amplifier circuit IC uses imported components with a maximum signal gain of 19dB. There is no need to use an external active antenna like the old version. Only an ordinary pull-rod antenna is needed to obtain good reception performance. Not included

Add an audio amplifier circuit to solve the problem of low volume of SSB single-sideband in CEC English firmware.
FM frequency modulation and HF amplitude modulation medium and short wave bandpass filters are added to the adapter board which has stronger anti-interference ability.
High-quality high-frequency winding chip inductors are selected with high Q value small internal resistance and stronger filtering selectivity.
The soft board FPC uses a non- substrate and PI is divided into two types: substrate and non- substrate. This product uses a non- substrate which is more resistant to high temperature and has a longer life.
The cost of using immersion gold process is higher than that of traditional tin-plated plate which has higher reliability and stability in conductivity and oxidation resistance.
The components are soldered by machine which has a higher yield rate than traditional manual soldering and has less thermal damage to FPC soft board and components greatly improving the service life.
Due to different batches there may be differences in product appearance color and printed text which will not affect the use.
Colour:Orange&Yellow
Material:FPC

Package Contents:
1 x SI4732 V6.8 FPC Module with Accessory Kit
2 x 2M Expansion Chipfactory serial number may vary depending on the batch
1 x Adapter board

Only the above package content other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best pricewe support Wholesale/Drop Shipping Order
1. For Drop Shipping order please remark"dropshipping order" we will prioritize it.
2. For Wholesale/Drop Shipping orders if you have any ideas about the price or packageplease contact us in advancewe will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the orderplease contact us in advance we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your packageplease don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !