This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
2 units left
Free return within 7 days for ALL eligible itemsDetails
MIKI ENT SOLUTIONS
68%Seller Score
44 Followers
Shipping speed: Good
Quality Score: Poor
Customer Rating: Good
sE Electronics sE2200 Studio Condenser Cardioid Microphone with Isolation Pack is the latest update of the company's venerable large-diaphragm cardioid condenser mic. The sE2200 delivers the same stunning, up-front sound and full feature set that made the original version such a huge hit. This is an incredibly versatile microphone, equally at home in front of a guitar cabinet as it is over a drum kit.
The sE Electronics sE2200 condenser microphone features a fixed cardioid polar pattern whch does a great job of capturing what's in front of it while rejecting bleed from adjacent sources and ambient sound from the rest of the room.
Features:
Capsule Type: Hand-Crafted 1" True Condenser
Polar Pattern: Cardioid
Frequency range: 20 Hz - 20 kHz
Sensitivity: 23.7 mV/Pa (-32.5 dBV)
Max SPL: 125 / 135 / 145 dB (0/10/20 dB pad) (0.5% THD @ 1kHz)
Equivalent noise level: 12 dB(A)
Dynamic range: 113 / 123 / 133 dB (0/10/20 dB Attentuation pad)
Signal to Noise Ratio: 82 dB
Low-cut filter: 80 / 160 Hz, 6 dB/Oct, switchable
Attenuation Pad: 10 / 20 dB, switchable
Powering: 48 Volts according to IEC 61938
Electrical Impedance: <50 Ohms
Recommended load impedance: >1k Ohms
Current consumption: 4.2 mA
Connectivity: 3-pin male XLR connector
Dimensions: Diameter: 51mm (2.01 in), Length 215mm (8.46 in)
Weight: 611 g (21.55 oz.)
Features:
Capsule Type: Hand-Crafted 1" True Condenser
Polar Pattern: Cardioid
Frequency range: 20 Hz - 20 kHz
Sensitivity: 23.7 mV/Pa (-32.5 dBV)
Max SPL: 125 / 135 / 145 dB (0/10/20 dB pad) (0.5% THD @ 1kHz)
Equivalent noise level: 12 dB(A)
Dynamic range: 113 / 123 / 133 dB (0/10/20 dB Attentuation pad)
Signal to Noise Ratio: 82 dB
Low-cut filter: 80 / 160 Hz, 6 dB/Oct, switchable
Attenuation Pad: 10 / 20 dB, switchable
Powering: 48 Volts according to IEC 61938
Electrical Impedance: <50 Ohms
Recommended load impedance: >1k Ohms
Current consumption: 4.2 mA
Connectivity: 3-pin male XLR connector
Dimensions: Diameter: 51mm (2.01 in), Length 215mm (8.46 in)
Weight: 611 g (21.55 oz.)
Customers who have bought this product have not yet posted comments
/product/81/6759814/1.jpg?3785)