SATA 3.0 Expansion Card 4-Port PCIE To SATA 3.0 Expansi

Features:

1. Rear SATA3.0 interface: The new upgrade expands the four rear SATA3.0 interfaces, which is more suitable for narrow spaces. 2U can also be better fixed; from the rear wiring, there will be no crossover with the graphics card.

2. 4U, 2U universal: This product is equipped with 4U, 2U double fixed brackets, which are supported by large or small chassis.

3. Larger heat sink: better heat dissipation and more suitable for long hours of work.

4. PCI-E interface: It is easy to install in the PCI-EXPRESS slot of the chassis with a thick gold-plated PCI-E interface. Better contact and easy data transmission can effectively reduce the data loss rate.

5. The tail is designed to be flush: the chance of blocking the graphics card fan is smaller.

6. Four-layer circuit board with isolation layer in the middle for stronger anti-interference ability.

7. Original mode selection: AHCI, IDE, data disk, three modes are free to choose.



Specification:

Model: SA3004

Bus interface: PCI-E X1 (compatible with X4, X8, X16/graphic interface)

Number of interfaces: SATA3.0 interface * 4

System support: for Windows XP/2003/Vista/Win7/Win8/Win10 (32/64 bit) operating system

Size: Approx. 120 x 65 x 56mm / 4.7 x 2.6 x 2.2in (As pictures show)

Weight: approx. 89g



Package list:

1 x Expansion Card

1 x 2U Baffle

2 x Screw


.wang-edit-text{
font-family:'Arial' !important;
}
.wang-edit-text table {
border-top: 1px solid #000;
border-left: 1px solid #000;
}
.wang-edit-text table td,
.wang-edit-text table th {
border-bottom: 1px solid #000;
border-right: 1px solid #000;
padding: 3px 5px;
}
.wang-edit-text table th {
text-align: center;
}
Note:Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.