Rivet Gun Adapter, Rivet Gun Adapter Kit For Cordless Drill, Electric Rivet Gun Riveting Tool

Material The electric rivet gun set is made of forged metal and has high working strength. The alloy steel forged gun head has high hardness, saving time and effort.

Vertical grip handle The handle is made of hard plastic with anti-skid lines, which is not easy to slip with vertical grip.

Hexagonal connecting rod Stable clamping, can be connected to lithium drill, twist drill, pistol drill, etc. Suitable for all kinds of rivets with shaft diameter: 2.4 / 3.2 / 4.0 / 4.8mm.

Pliers Not easy to slip nails, fast speed and high efficiency, three-claw nail anastomosis design, smooth riveting without burrs, three-piece structure is not easy to get stuck.

Advantage Compared with traditional rivet guns, it has lower noise, small size, more efficient and easy to carry. And more economical than manual and more convenient than pneumatic rivet gun.

Product specifications:

Material: alloy steel + hard plastic.

Color: black.

Application: Draw 2.4 / 3.2 / 4.0 / 4.8mm core pull rivets.

Installation methods:

* Step 1: Insert the electric drill into the conversion chuck. Do not adjust the speed too high.

* Step 2: Turn the drill clockwise to tighten the chuck on the locking chuck. At this time, the electric drill rotates the rivet gun counterclockwise and makes a dripping sound toward the rivet.

* Step 3: Place the electric drill into the rivet pin in time and align it with the hole.

* Step 4: Remove the drill counterclockwise from the rivet.

Package Included:

1 x Rivet Joint

1 x Handle

1 x Wrench

4 x Rivet Heads

• • Product specifications:
    
    Material: alloy steel + hard plastic.
    Color: black.
    Gun adapter length: 150mm
    Hex shank diameter: 6.35mm (1/4 inch)
    Wrench length: 149mm
    Handle length: 123mm
    Application: Draw 2.4/3.2/4.0/4.8mm core pull rivets.
    
    Installation methods:
    
    * Step 1: Insert the electric drill into the conversion chuck. Do not adjust the speed too high.
    * Step 2: Turn the drill clockwise to clamp the chuck on the locking chuck. At this time, the electric drill rotates the rivet gun counterclockwise and makes a dripping sound toward the rivet.
    * Step 3: Place the electric drill into the rivet pin at time and align it with the hole.
    * Step 4: Remove the drill counterclockwise from the rivet.
    
    Package Included:
    
    1 x Rivet Joint
    1 x Handle
    1 x Wrench
    4 x Rivet Heads