Raspberry Pi PoE HAT 802.3af Power Over Ethernet GPIO Expansion Board With Cooling Fan Optional CPU OLED For Pi 3B+ 4B

B: POE HAT FOR RASPBERRY PI

Power Over Ethernet HAT For Raspberry Pi 3B+/4B, 802.3af-Compliant (Any Backward-Compatible Future Versions Will Be Supported As Well)

OLED for real-time monitoring temperature, IP, and fan status

The PoE HAT (B) is a 802.3af-compliant Power Over Ethernet acceory for the Raspberry Pi 3B+/4B . By using this small HAT and some proper 802.3af-compliant power sourcing equipments, it is poible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.

Features At A Glance

Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B

PoE (Power Over Ethernet) capability，802.3af-compliant

Fully isolated switched-mode power supply (SMPS)

0.91" OLED, for monitoring proceor temperature, IP addre, and fan status in real-time

Onboard cooling fan, allows auto running on powerup OR programmable control, configured by switch

Integrates PCF8574 IO expander for I2C bus, providing pin P0 for directly fan control, and more spare IO pin

Specifications

POE POWER INPUT

37V ~ 57V DC in

OLED SIZE

0.91"

POE POWER OUTPUT

5V 2.5A DC out

OLED PIXELS

128×32

NETWORK STANDARD

802.3af PoE

OLED DRIVER

SSD1306

DIMENSIONS

56.5 × 65mm

OLED DISPLAY COLOR

For Use With Raspberry Pi 3B+/4B

Standard Raspberry Pi 40PIN GPIO Stackable Header, Allows Connecting Other HAT

Power Over Ethernet

Providing Both Network Connection And Power Supply For Your Raspberry Pi In One Cable

* proper 802.3af-compliant power sourcing equipment is required

0.91" OLED Display

128 × 32 Pixels, I2C-Bus Controlled Monitoring Proceor Temperature, IP Addre, Fan Status In Real-Time

Cooling Fan

Allows Auto Running On Powerup OR Programmable Control, Configured By Switch Automatically Turn On/Off Depending On The Raspberry Pi Proceor Temperature

Onboard PCF8574

PCF8574 IO Expander For I2C Bus, Providing 8 IO Pins, Of Which P0 For Fan Control And Extra Spare Pins On Solder Pads (P1-P7, INT)

Pinout Definition Outline Dimensions Packing List : 1 x PoE HAT (B) 1 x Standoffs pack (not include Raspberry Pi)

How to use

https://www.waveshare.com/wiki/PoE_HAT_(B)

C: POE HAT FOR RASPBERRY PI

Power Over Ethernet HAT For Raspberry Pi 3B+/4B, 802.3af/at -Compliant (Any Backward-Compatible Future Versions Will Be Supported As Well)

12V and 5V power outputs to support more peripherals Features At A Glance

The PoE HAT (C) is a 802.3af/at-compliant Power Over Ethernet acceory for the Raspberry Pi 3B+/4B . By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is poible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.

Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B

PoE (Power Over Ethernet) capability，IEEE 802.3af/at-compliant

Fully isolated switched-mode power supply (SMPS)

While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device

Onboard high speed active cooling fan, better heat diipation

Specifications

POE POWER INPUT

37V ~ 57V DC in

POWER OUTPUT

USB-A: 5V 4A (MAX) 2P header: 12V 2A (MAX)

NETWORK STANDARD

IEEE 802.3af/at PoE

DIMENSIONS

56.5 × 65mm

For Use With Raspberry Pi 3B+/4B

Standard Raspberry Pi 40PIN GPIO Stackable Header, Allows Connecting Other HAT

Power Over Ethernet

Providing Both Network Connection And Power Supply For Your Raspberry Pi In One Cable

Raspberry Pi or PoE equipment is NOT included. 5V USB-A & 12V Header Outputs

5V USB-A Provides Up To 4A Output (MAX 25W For 12V+5V Total Output Power) Be Able To Power Extra Device While Providing Stable Power To Raspberry Pi

Active Cooling Fan Onboard MP8676 Buck

Incorporates Voltage Buck Providing Up To 4.5A Output For Raspberry Pi And USB-A Port

Outline Dimensions Resources & Services WIKI: PoE_HAT_(C) D: Power Over Ethernet HAT (Type D) For Raspberry Pi 3B+/4B, 802.3af-Compliant, Tailored For Raspberry Pi Official Case POE HAT FOR RASPBERRY PI

Power Over Ethernet HAT For Raspberry Pi 3B+/4B, 802.3af-Compliant

Tailored for Raspberry Pi official case Features At A Glance

The PoE HAT (D) is an 802.3af-compliant Power Over Ethernet acceory for the Raspberry Pi 3B+/4B . By using this small HAT and some proper 802.3af-compliant power sourcing equipments, it is poible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.

Supports Raspberry Pi 3B+/4B, compatible with the Raspberry Pi official case

PoE (Power Over Ethernet) capability，IEEE 802.3af-compliant

Fully isolated switched-mode power supply (SMPS)

Onboard high speed active cooling fan, better heat diipation

Specifications

POE POWER INPUT

37V ~ 57V DC in

POWER OUTPUT

5V 2.5A DC out

NETWORK STANDARD

IEEE 802.3af PoE

DIMENSIONS

58.90 × 54.92mm

For Use With Raspberry Pi 3B+/4B Compatible With Official Case

Raspberry Pi Official 4B Case (Left) And Raspberry Pi Official 3B+ Case (Right)

Application Example Power Over Ethernet

Providing Both Network Connection And Power Supply For Your Raspberry Pi In One Cable

Raspberry Pi, official cases, and PoE equipment are NOT included. Active Cooling Fan Onboard Resources Outline Dimensions Resources & Services WIKI: PoE_HAT_(D)

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.