Raspberry Pi PICO RP2040 Development Board Onboard 1.28inch Round LCD Display Screen / Accelerometer / Gyroscope Rs

Note: On-board with RP2040 microcontroller , Which mean you do not need a raspberry pi pico board to control it

Overview

RP2040-LCD-1.28 is a low-cost, high-performance microcontroller board. On-board 1.28inch LCD circular screen, lithium battery charging , six-axis r (three-axis acceleration and three-axis gyroscope) and other peripherals, lead out alPIO and Debug interfaces, and integrate it into end products quickly.

Features

RP2040 microcontroller designed by Raspberry Pi

Dual-core Arm Cortex M0+ proceor, running up to 133 MHz

264KB of SRAM, and 2MB of on-board Flash memory

Type-C interface

On-board 1.28-inch 240 × 240 resolution, 65K color IPS LCD display for clear color picture

On-board lithium battery charging and discharging interface

AlPIO are led out through 1.27 pitch female headers (30 in total, but some pins have been connected to internal circuits, you need to pay attention when multiplexing, please refer to the wiki for details)

USB 1.1 with device and host support

Low-power sleep and dormant mode

Drag-and-drop programming using ma storage over USB

2 × , 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channel

Accurate clock and timer on-

Temperature r

Accelerated floating-point libraries on-

8 × Programmable I/O (PIO) state machines for custom peripheral support

C/C++, MicroPython Support

Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started

Dual-Core Arm Proceor Dual-Core Arm Cortex M0+ Proceor, Running Up To 133 MHz . 30 × Multi-Function GPIO Pins . Configurable Pin Function, Allows Flexible Development And Integration Resource Introduction

USB Type-C

USB Type-C interface, Support USB 1.1 host and device

ETA6096

High-efficiency lithium battery charging

Battery interface

MX1.25 connector, can be used to connect 3.7V lithium battery,

support charging and discharging

QMI8658C

Six-axis inertial measurement unit (IMU)

containing a 3-axis gyroscope and a 3-axis accelerometer

Pin header

1.27mm pitch pin header, Lead out alPIO and Debug interfaces

W25Q16JVUXIQ

2MB NOR-Flash

RP2040

Dual-Core Arm Cortex M0+ Proceor, Running Up To 133 MHz

RESET on

RESET on

BOOT on

Pre during reset to enter download mode

Outline Dimensions Package Contains

RP2040-LCD-1.28 × 1

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.