Raspberry Pi Duplex Board Hotspot Board Kit P25 DMR YSF For

₦ 48,572

₦ 92,89448%

In stock

+ shipping from ₦ 9,300 to LEKKI-AJAH (SANGOTEDO)

0 out of 5

(No ratings available)

Variation available

Raspberry Pi Duplex Board Hotspot Board Kit P25 DMR YSF For

Promotions

Call 07006000000 To Place Your Order Need extra money? Loan up to N500,000 on the JumiaPay Android app. Enjoy cheaper shipping fees when you select a PickUp Station at checkout.

Report incorrect product information

Delivery & Returns

Shipped from abroad

Choose your location

Pickup Station

Delivery Fees ₦ 9,300

Ready for pickup between 29 July and 31 July if you place your order within the next 13hrs 43mins

Door Delivery

Delivery Fees ₦ 10,210

Ready for delivery between 29 July and 31 July if you place your order within the next 13hrs 43mins

Return Policy

Free return within 7 days for ALL eligible itemsDetails

Seller Information

On a good store

78%Seller Score

10 Followers

Seller Performance

Shipping speed: Good

Quality Score: Excellent

Customer Rating: Average

Product details

This link is only available for Mini Duplex MMDVM boards. Setting up Pi-star software and raspberry hardware (rpi 0-3) New pi4b requires removal of Right Socket.

Features:

Pi-star general configuration for MMDVM_DUPLEX

Set Controller Mode: Duplex Repeaters or Simple

Radio Frequency: Freq: 144-148, 219-225, (primary band) 420-475, 842-950

Duplex Mode: Example: RX:438.000000 TX:433.000000

Duplex Mode: Example: RX:145.000000 TX:433.000000

Simplex Mode: Example: RX:438.000000 TX:438.000000

Radio/Modem Type: STM32-DVM/MMDVM_HS-Raspberry pi Hat (GPIO) or any other (GPIO board)

Options: (not required now, some older boards need to be set)

Admin->Expert->Edit MMDVMHOST->RXOFFSET=0 TXOFFSET=0 (default value in pistar)

(Update: 2019/2 New 3225 TCXO so offset is 0 )

Update new firmware: (pi-star / Expert / ssh access / user :pi-star pass:raspberry)

sudo pistar-mmdvmhshatflash hs_dual_hat

The default BER is less than 5% and the default offset is 0. If the BER is greater than 5%, it can be corrected by offset as long as the signal can be received.

Specifications:

Name: Hotspot Board

Material: printed circuit board

Package size: 80 * 50 * 20mm / 3.15 * 1.97 * 0.79in

Package weight: 10g / 0.35ounce

Packing List:

1 * Hotspot Board