Practical Delay Relay Module with LCD Display for DC 5V 12V 24V Dial Timer Cycle Delay Control Switch Module AC 110V

Features:1.High precision and good stability2.With automatic memory function3.Easy to operate and set up4.Output with LED indicator light, with a large delay range5.Exquisite appearance, high-definition LCD display screen

s:Product Name: Dial Display Time RelayPower supply voltage: DC 5v 12v 24v AC 110-220vRange selection: 0.01 seconds 1 second, 1 second, 1 minuteTiming range: minimum 0.01 seconds, maximum 999 minutesOpening size: 40MM * 74MMCurrent: DC max 10A AC max 5AUser ManualThis product has four ons: on up, on down, set, stop or start. There are two sets of time T1 and T2 for users to set.

Matters needing attention:1. All s of the relay are automatically memorized for 5 seconds,If it is neceary to stop during operation, preing the stop on will stop the relay, reset the data, and pre the stop on again to trier again.3. The normal execution of the relay ends, and preing the stop on can trier the start again.T1 time setting:Directly pre the on to add or subct to set T1. After 5 seconds of setting, the data will be automatically memorized and the timer will start.T2 time setting:Pre the setting key briefly, the Nixie tube will f. At this time, pre the key to add or subct T2, and the automatic memory will start to run 5 seconds after the setting is completed.Time range: Automatically switch the range. The default range is seconds, the number decreases to 0, and if you continue to pre the decrease on, the range will automatically switch to 99.9s; Add the number to 999, continue preing the on, and the range will automatically switch to 0.0.0The number format is as followsX. X X -- Time range 0.01sX X. X - Time range 0 1sX X X -- Time range 1sX. X. X - Time range 1minFor example, if T1=8.88 is set, the controller will countdown at 0.01s, and T2=8 8.8, the controller counts down to 1 minute.Working mode settings: 6 working modes for users to set.pre the setting on to enter the P-0 , and set the desired working mode on the current interface by preing the plus or minus ons.P-0: Relay opens after a delay of T1 time, endingP-1: The relay closes after a delay of T1 time, endingP-2: The relay closes after a delay of T1 time, and then opens after a delay of T2 time, endingP-3: The relay opens after a delay of T1 time and closes after a delay of T2 time, endingP-4: The relay closes after a delay of T1 time, and then opens after a delay of T2 time, cyclingP-5: Relay opens after a delay of T1 time, closes after a delay of T2 time, and cyclesTypical application: First delay the relay by 4.05 seconds before opening, then close it after a delay of 10 minutes, and set the time first after the end, T1=4 05 T2=0 1.0 Next, set the working mode P-3, and after 5 seconds of setting, it will automatically memorize and start running.

Package include:Relay module * 1