Power Amplifier 600W Bluetooth HiFi Audio Stereo BT-298

600W Bluetooth HiFi Audio Stereo Power Amplifier Note: This amp focuses on cost effectiveness. We guarantee that it will outperform other amps in the same price range. Its maximum power is 600W and its rated power is 80W. It is recommended to connect 6.5-inch to 10-inch speakers. Speakers that are too large can also play music normally, but the higher the volume, the sound quality will decrease and cause distortion.

RMS 40Wx2 Stereo Effect

This little BT amp packs a lot of power for its size! It sounds clear and clean, it gets quite loud without any loss of sound quality. Its small size makes it easy to handle. The low profile design easily fits into your bookshelf or A/V cabinets. A great volume for a small apartment, such as a dorm room, small office, basement, and garage.

Affordable Budget But Great Sound

Great value for money for beginners who don't want to spend a lot of money and don't need anything too fancy. (NOTE: This small BT Amp receiver is ideal for your needs if it is a room type situation or where a large and expensive system would not be desirable. But if you are a professional audiophile, be sure to go for the much more massively expensive one.) 30-Day Money Back Guarantee and Lifetime Warranty and Product Support are included.

Bluetooth/RCA/USB/SD Card/2 MIC/FM Inputs

You can connect it with your music streaming devices like PC/Mobile/Laptop either with Bluetooth connection, RCA and MIC input. It also supports USB port, SD/TF card port and FM radio. (NOTE 1: Please keep 5m/16.4ft distance between the device and the amplifier without any wall block. But if you connect with PC devices, please keep 2m/6.5ft distance.) (NOTE 2: The frequency range of radio reception is 87.5-108 MHz.)

Easy Operation

Its remote control function allows you to change audio settings from a distance, making it less tiring and more comfortable. With the bass and treble control knobs you can set the desired music output according to your wishes. The bright digital LED display allows you to see the settings you change easily.

Warm Tips

The 2 microphone inputs are nice and handy for karaoke or announcements. But if you somehow hear a hissing sound from the microphone ports even when you are not playing music, don't worry. It's just the magnetic interference with your own microphones, which is mostly caused by condenser microphones, so we suggest using dynamic microphones instead. Or put a magnetic block there and the hissing will disappear.

Specifications:

Model: BT-298A

Input voltage: AC 110V, DC 12V

Sound channel: 2.0

Peak power: 300W+300W

RMS: 40W+40W

Load impedance: 4-16 (ohms)

Frequency: 10Hz - 20kHz

Distortion rate: 0.05%

SNR: >92dB

Color: Black