PH-98106 Meter Digital Acidity Meter PH Tester Soil Tester

Detailed Information About The Product:

1, pH calibration Immerse the pH electrode in a mixed phosphate standard buffer solution with a pH value of 686 (25°C) and shake gently
2. Use a small screwdriver to adjust the calibration potentiometer until the displayed value matches the pH value of the standard buffer solution at the solution temperature. Then wash the electrode of the pH meter with distilled water, and use filter paper to dry the moisture attached to the electrode and its surroundings.
3. Insert the electrode into potassium hydrogen phosphophthalate pH4.01 or borax standard buffer solution pH9.18
4. When the displayed value is stable, the displayed value should be within the allowable error range compared with the pH value of the buffer solution

The PH of the water is very important to the fishDifferent fish have different requirements for the PH of the water
PH : 0.00 ~ 14.00 The acid-base reaction of water directl affects human health
Automatic Temperature Compensation: 0 Celsius -50 Celsius
Battery Type: 3X1.5V(AG13)
Environment: RH less than 95%
Dimensions(mm): 221 x 51mm
Wide ApplicationSuitable for water quality testing , aquaculture ,farmland irrigation , laboratories , farms , etc
Color: Red
Material: plastic

Package Contents:
1 x Digital Acidity Meter

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.