HomeComputingComputer AccessoriesPCA9548A I2C 8-Channel Multiplexer Breakout Expansion Board
product_image_name-Generic-PCA9548A I2C 8-Channel Multiplexer Breakout Expansion Board-1product_image_name-Generic-PCA9548A I2C 8-Channel Multiplexer Breakout Expansion Board-2

Share this product

PCA9548A I2C 8-Channel Multiplexer Breakout Expansion Board

₦ 5,000

7 units left

+ shipping from ₦ 750 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)

Promotions

Delivery & Returns

Choose your location

Pickup Station

Delivery Fees ₦ 750
Ready for pickup between 20 October and 21 October if you place your order within the next 15hrs 19mins

Door Delivery

Delivery Fees ₦ 1,710
Ready for delivery between 20 October and 21 October if you place your order within the next 15hrs 19mins

Return Policy

Free return within 7 days for ALL eligible itemsDetails

Seller Information

LVK

88%Seller Score

117 Followers

Follow

Seller Performance

Shipping speed: Good

Quality Score: Excellent

Customer Rating: Average

Product details

The TCA9548A I2C multiplexer allows you to communicate with up to 8 I2C devices with the same I2C bus. The multiplexer communicates with a microcontroller using the I2C communication protocol. Then, you can select which I2C bus on the multiplexer you want to address.

To address a specific port, you just need to send a single byte to the multiplexer with the desired output port number.

 

Features:

  • 1 to 8 bidirectional translating switches
  • Active-low reset input
  • Three address pins—up to 8 TCA9548A devices on the same I2C bus
  • Channel selection through an I2C bus
  • Operating power supply voltage range: 1.65V to 5.5V
  • 5V tolerant pins

TCA9548A Pinout:

PinDescription
VINPowers the multiplexer
GNDConnect to GND
SDAConnect to the master microcontroller SDA pin
SCLConnect to the master microcontroller SCL pin
RSTActive low RST pin—can be used to reset the multiplexer
A0Selects multiplexer I2C address—connect to GND or VCC
A1Selects multiplexer I2C address—connect to GND or VCC
A2Selects multiplexer I2C address—connect to GND or VCC
SD0SDA for channel 0
SC0SCL for channel 0
SD1SDA for channel 1
SC1SCL for channel 1
SD2SDA for channel 2
SC2SCL for channel 2
SD3SDA for channel 3
SC3SCL for channel 3
SD4SDA for channel 4
SC4SCL for channel 4
SD5SDA for channel 5
SC5SCL for channel 5
SD6SDA for channel 6
SC6SCL for channel 6
SD7SDA for channel 7
SC7SCL for channel 7

TCA9548A Multiplexer I2C Address:

The TCA9548A Multiplexer communicates with a microcontroller using the I2C communication protocol. So, it needs an I2C address. The address of the multiplexer is configurable. You can select a value from 0x70 to 0x77 by adjusting the values of the A0, A1, and A2 pins, as shown in the table below.

A0A1A2I2C Address
LOWLOWLOW0x70
HIGHLOWLOW0x71
LOWHIGHLOW0x72
HIGHHIGHLOW0x73
LOWLOWHIGH0x74
HIGHLOWHIGH0x75
LOWHIGHHIGH0x76
HIGHHIGHHIGH0x77

Tutorial: https://randomnerdtutorials.com/tca9548a-i2c-multiplexer-esp32-esp8266-arduino/

Datasheet: https://cdn-shop.adafruit.com/datasheets/tca9548a.pdf

Specifications

Key Features

Features:

  • 1 to 8 bidirectional translating switches
  • Active-low reset input
  • Three address pins—up to 8 TCA9548A devices on the same I2C bus
  • Channel selection through an I2C bus
  • Operating power supply voltage range: 1.65V to 5.5V
  • 5V tolerant pins

Specifications

  • SKU: GE779EA871IR5NAFAMZ
  • Model: PCA9548A
  • Weight (kg): 0.1

Verified Customer Feedback

Customers who have bought this product have not yet posted comments

PCA9548A I2C 8-Channel Multiplexer Breakout Expansion Board

PCA9548A I2C 8-Channel Multiplexer Breakout Expansion Board

₦ 5,000
Questions about this product?

Recently Viewed

See All