Oukitel WP10 LCD Touchscreen

Oukitel WP10 ested LCD Touchscreen Replacement

Before Fixing Notes:

Tips 1: Test before fixing it

When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.

Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.

Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.

Tips 2: Simulates testing

Screen replacement is very fragile product. We strongly suggest test before fixing it. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please fix it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed wrongly.

Tips 3: Do not over-bend cable

Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

About the product:

• Replacement LCD touchscreen for Oukitel WP10
• Replace the old, broken, cracked, damaged one
• Make your device look more refreshing than ever
• Completely fit and work
• Each item has been checked and in good condition before shipping
• Professional attention is highly recommended. We will not be responsible once the screen is installed

Warning:

1. Replacing the screen requires testing it thoroughly on the device before fixing it on the device. Because once it's glued on the device, it cannot be accepted back if you return it with a complaint that it's faulty afterwards. This is a mobile phone parts not a whole consumer electronics. So it is needed to be tested before fixing it on the device. If you can't heed this warning please don't border buying from us, thanks!
2. LCD screens, touch screens, and cables require professional attention. It is not recommended for customers without phone repair technical DIY experience to install it! If you are not sure you can replace it, please try to hand it over to a very good phone repair shop and pay a little fee to let professionals install it! Before fixing it, use the motherboard to test the purchased product. After there are no problems, install it! Remember not to rush to  install it as soon as you receive the goods. You must try it first before installing it!  During the fixing process, do not fold the cable in half, and do not tear off the film, labels, and seals at will. The above are all warranty basis!