Home Computing Computers & Accessories MonitorsNano V3.0 Atmega328P Ch340C Built-In 0.91" Oled Display 128*32 Resolution Iic I2C Compatible for Ard-UNO Nano V3.0

Share this product

Nano V3.0 Atmega328P Ch340C Built-In 0.91" Oled Display 128*32 Resolution Iic I2C Compatible for Ard-UNO Nano V3.0

₦ 18,000

3 units left

+ shipping from ₦ 1,700 to LEKKI-AJAH (SANGOTEDO)

0 out of 5

(No ratings available)

Promotions

Call 02018883300 To Place Your Order Enjoy cheaper shipping fees when you select a PickUp Station at checkout.

Report incorrect product information

Delivery & Returns

Choose your location

Pickup Station

Delivery Fees ₦ 1,700

Ready for pickup between 01 October and 02 October if you place your order within the next 16hrs 21mins

Door Delivery

Delivery Fees ₦ 2,750

Ready for delivery between 01 October and 02 October if you place your order within the next 16hrs 21mins

Return Policy

Free return within 7 days for ALL eligible itemsDetails

Warranty

1 year limited waranty

Seller Information

PIERTOELECT.NIG.LIMITED

56%Seller Score

30 Followers

Seller Performance

Shipping speed: Excellent

Quality Score: Very Poor

Customer Rating: Very Poor

Cancellation Rate: Excellent

Product details

Features:
1.The product uses high quality PCB material, stable performance, quality assurance
2.Products in the original Nano V3.0 motherboard upgraded to with 0.91-inch OLED display, resolution 128 * 32, more convenient and clearer to use
3.Main control chip: ATmega328P, serial chip: CH340C
4.Diversified product interface options, three optional: MINI USB interface, Micro USB interface, Type-C USB interface
5.Module test display programme has been written into the firmware, get it after inserting the USB connection to the computer can be used

Product Overview:
The development board in the original Nano V3.0 motherboard upgraded to with a 0.91-inch OLED display, resolution up to 128 * 32, the main control chip using ATmega328P, the serial chip using CH340C, the module test display program has been written into the firmware, get it to plug into the USB connection to the computer can be used, respectively: MINI USB interface, Micro USB interface, Type-C USB interface.interface, Type-C USB interface, three interfaces can be selected, the same function.

Parameter:
1.12 digital input/output ports D2-D13
2.8 analogue input ports A0-A7
3.1 pair of TTL level serial transceive ports RX/TX
4.6 PWM ports, D3, D5, D6,D9,D10,D11
5.Using Atmega328p microcontroller
6.Support USB download and power supply
7.Support VIN6-12V DC power supply.
8.Support ISP download

Indicator light description:
D13: red
Pow: red
TX: green
RX: green
1.Access to the USB computer to identify the port, the module displays data, TX and POW indicator light is always on
2.Open the serial port assistant, select the corresponding parameters and open the COM port, the window receives data, open the serial port when the first line of the OLED screen BOOT Time will be retimed.
3.Send AT command through the serial assistant, TX light off, RX light blinks once, D13 light is short once, OLED screen displays AT-OK, and then the whole white screen, and then return to the display data interface, the indicator light returns to TX and POW is always on.

Package include:
Development Board X1