Multi Purpose Mini DC UPS Router Power Bank 8800mAh For WIFI Router & CCTV

Multi Purpose Router Power Bank DC UPS 8800mAh For WIFI Router & CCTV

Efficient and durable, The MultiPurpose Powerbank/Mini-UPS, PoE 432E for Wifi Router And CCTV has the following features Built in Lithium Battery Microprocessor controller guarantees high reliability Auto start when plugged in Manual Power off switch Overload and Short-circuit protection Over-Charge and Over-Discharge protection user friendly multi-LED status indicators Allows to set output voltage 9/12VDC and 15/24v PoE via switch VDC USB charger Application: Router, Modem, Wireless Phone, CCTV Battery Capacity: 8800mah This backup can be usedfor all routers, decoders, time attendance machine, CCTV cameras and so on.It has a long lasting battery duration.Overload and Short-circuit protection Over-Charge and Over-Discharge protection user friendly multi-LED status indicators Allows to set output voltage 9/12VDC and 15/24v PoE via switch 5VDC USB charger Application: Router, Modem, Wireless Phone, CCTV Battery Capacity: 8800mah This backup can be used for all routers, decoders, time attendance machine, CCTV cameras and so on.It has a long lasting battery duration. Lightening and surge protection Short circuit and overload protection Energy saving function with UPS green mode Line Interactive design

Intelligent circuit design with over-charging, over-discharging, and short-circuit protections

-Protect your devices from a power outage, compatible with the router, modem, security camera, smartphone, camcorder, and DSL, and can still use the network in case of a power outage

-Mini uninterruptible power supply backup battery pack can power most 12V/9V DC equipment, wireless routers, telephones, LED strips, monitor cameras, etc. It can provide hours of operation during power failure

-The uninterruptible power supply is a kind of backup energy storage power supply

1. In order to avoid over discharging of the lithium batteries, please restart the UPS when the AC is available after low battery cutoff 
2. Before connecting the loads to the UPS, it is must to check their nominal working voltage, current and polarity which you can find on their original adapters 
3. Please charge UPS full of battery before connect with loads 
4. Please output power of this model is controlled by total power capacity. 
5. Press and hold the power button for 2 to 3 seconds to switch on the UPS 

WARNING 

1. Do check the working voltage, current and polarity of the loads before connecting them to the UPS, then choose the corresponding voltage 
2. Please charge fully before initial use
3. Dropping, hitting, disassembling and repairing privately are forbidden 
4. Don’t put the UPS into water or make it wet
5. Don’t dispose of the UPS in fire or heating 
6. Don’t use the UPS in any flammable environment 
7. Don’t put the UPS in any places where children can reach 

Standard AC/Mains 220v input
-4 X Built-in high capacity lithium batteries
-Built in surge protection
-5/9/12v Twin DC jack output for most devices
(Typical connection: Both Router + Fiber ONT Device)
-5V USB output available for charging of mobile phones and similar devices.

Features;
-Easy to use
-Portable and durable
-Safe to use

Specifications;
-Dimensions ; 160 x 102 x 32mm
-Net Weight ; 0.5kg

What's in the box

1 x 10400mAh Mini, portable DC UPS
1 X DC Dual Output cable
1 X Power input cable