Motherboard for RP2040 Core Board Compatible RP2 Pico Microp

Detailed Information About The Product:

The RP2040 microprocessor (MCU) integrates a dual-core ARM architecture Cotex-MO+ core, directly integrates 264KB of RAM internally, supports up to 16M Qgood external expansion Flash, and highly flexible I/O settings, including I2C, good, PIO (Programmable I/O).
Dual-core ARM -M0+@ 133MHz, 264kB built-in distributed in 6 blocks, Max external Qgood Flash expansion, directly connected to the AHB bus, equipped Complete interpolator and integer divider, on-chip programmable LDO to generate core voltage, 2 on-chip PLL phase-locked loops for USB and core clock generation, 30 GPIO pins, 4 of which can be used as analog inputs.
Peripherals : 2 serial ports/2 good/2 I2C/16PWM channels/USB 1.1 controller and PHY, supports host mode and slave mode/8 PIO state machine. Regarding the YD-RP2040 core board, YD-RP2040 is a core board circuit board produced by VCC-GND® Studio using the RP2040 microprocessor (MCU) issued by the British for Company. It is convenient for users to expand peripherals and design and build circuits.
Light-emitting diode description: Power indicator light, red light, used to indicate power on status, LED, GPIO25, blue light, used for user programming control, RGB LED WS2812B, GPIO23, used for user programming control
Key description: KEY, GPIO24, used for user programming input control BOOT KEY, used for boot download KEY: used to reset the system, or enter boot download mode with BOOT KEY Description:
About the advantages of using RP2040 chip
for , with its extremely cost-effective for computer board, has become one of the leading computer data manufacturers. Cost-effectiveness has always been the label of . It can simply be considered an unfamiliar controller. The performance index is high enough and the necessary peripherals are also available. In , the target design can eventually be achieved.
Function:
The PWR power indicator light has been added to improve the human-computer interaction experience when USB power is plugged in.
Changing the micro-USB interface of for Pi Pico to the Type-C USB interface of YD-RP2040 core board makes it easier for users to find relevant USB cables.
Add a reset goodon to facilitate users to perform reset operations and update firmware in the power-on state.
Add USRkey user goodon to facilitate user verification and use simple input functions.
Type: 4MB No RGB light
Material: PCB
colour: good Package Contents:
1 x Core Motherboard Module
3 x Pin Header Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !