MG996R MG946R MG995 Metal Standard Servo 180 Degree Robot 20KG Servo

MG995 MG996R Metal Copper Gear Servo/55g Servo/Remote Control Car/Boat/ 13kg High Torque Servo

01: Structure material: simulated metal copper teeth 
02: Connection Line Length: 30cm cm, Signal Line (Yellow Line), Red Line (Power Line), Brown Line (Ground Line)
03: Size: 40.7*19.7*42.9mm
04: Weight: 55g
05: Response speed: no-load speed 0.17 seconds/60 degrees (4.8V); 0.13 seconds/60 degrees (6.0V)
06: Stall torque;
07:Work dead zone: 4 microseconds
08: Plug specification: JR  FUTABA Universal
09: Working voltage; 3.0V-7.2V
10: Working torque: 13KG/cm
11: Operating temperature: -30~~+60 degrees Celsius
12: Suitable models: bipedal robots/robotic arms/remote control cars, suitable for Class 50-90 methanol fixed-wing aircraft and
   26cc-50cc gasoline fixed-wing aircraft and other models
13: Attachment;  Steering wheel, fixing screws, shock-absorbing rubber sleeve and aluminum sleeve

 The control of the steering gear generally requires a time base pulse of about 20ms. The high-level part of this pulse is generally within the range of 0.5ms-2.5ms for angle control pulses, with a total interval of 2ms.Taking the 180-degree servo as an example, the corresponding control relationship is as follows:

   0.5ms--------------0 degrees;

   1.0ms------------45 degrees;

   1.5ms------------90 degrees;

   2.0ms-----------135 degrees;

   2.5ms-----------180 degrees;

Purpose: 1:10 and 1:8 Scale RC Cars, Off-Road Vehicles, Trucks, Buggies, Climbing Cars, Bipedal Robots, Manipulators,

Remote control boat, suitable for 50-level to 90-level methanol fixed-wing airplanes and 26cc-50cc gasoline fixed-wing airplanes and other models.

360-degree steering gear: It is actually equivalent to a continuously variable speed reduction motor that can control speed and direction.There is no function for 0-360 degree angle control.The control method is the same as the control signal of a regular servo.It's a suitable power source for WALL-E modification
 

(When the high level is 1 millisecond to 1.5 milliseconds, the servo rotates forward (fast rotation speed at 1 millisecond, slower as it approaches 1.5 milliseconds, stops at 1.5 milliseconds), reverse rotation occurs when the high level is 1.5 milliseconds to 2 milliseconds (stops at 1.5 milliseconds, faster rotation speed as it approaches 2 milliseconds, reverses quickly at 2 milliseconds)