MASTECH MS5902 Automatic Circuit Breaker Finder Fuse Socket Tester EU US 220V/110V Specification With Flashlight Circuit Tester

About Dropshipping:

1.Accept Dropshipping, and we will DO NOT put any invoices, QR codes, promotions in the shipment, So Dont worry, Just buy it, we will do anything well for you . 2.We are guarantee each device be tested rigorous before shipped out, SO all products can guarantee 100% high quality before sent out. Thank you very much!!!

Battery: 9V Battery(not included)

Features: Automatically and quickly finds correct breaker or fuse. Quickly and easy identifies conditions of circuit socket. Suitable for renovation, installation and acceptance of power grid in home, office and factory Buzzers and lights, flashlight lighting function, battery low voltage alarm Warning: Please caution extremely when use the MS5902 in the gigantic circuit breaker ark. Don't use when voltage more than 120V/230V AC.You can turn on the flashlight in the dark surroundings. Specifications: Type: Circuit Breaker Finder Material: Plastic Color: Black Size(L*W*H): About 198x40x50mm Plug: EU, US EU Voltage: 220V US Voltage: 110V Operating Voltage: AC220V/50HZ Operating Temperature: 0 ~ 50℃ Security Rating: IEC1010-1 CATII 600V Battery: 9V Battery(not included) Operation: Locating a circuit breaker or fuse Keep the pillar at left on the MS5902-T Plug the MS5902-T into the receptacle.If there is a candescent light fixture,please install a socket adapter before make sure the switch is OFF.Then plug the MS5902-T into the socket adapter, turn the switch on at one time.(Socket adapter need purchase additional) Go to the circuit breaker panel box. Turn the MS5902-R on,the red LED is light. Place the chapiter of the MS5902-R directly onto the circuit breaker or fuse. Slide the chapiter of the MS5902-R down each breaker along both sides of the panel . Then the MS5902-R will beep frequently as it denote the relative signal strength. Move the MS5902-R down each breaker once more. On the third pa, the MS5902-R will beep , the red LED will quench and the green LED will light only at the circuit Breaker powering the MS5902-T. Push the breaker off and check that the LED on the MS5902-T in the outlet is off to confirm you have found the correct breaker or buse. Test Socket: Keep the pillar at right on the MS5902-T. Please contradistinguish nameplate on the MS5902-T. Maintenance: Keep clean with a dry cloth. When the yellow LED is light on the MS5902-R, please unscrew and remove cover, insert 9V battery so as to the MS5902-R is well-balanced. Package Included: 1pc x Circuit Breaker Finder 1pc x Receiver Note: 1. Due to the light and screen difference, the item's color may be slightly different from the pictures. 2. Please allow 0.5-2 cm differences due to manual measurement.

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.