M2 For E M.2 For To SSD Adapter Card For Macbook Air Pro 2013 2014 2015 A1465 A1466 A1502 A1398 Ex4 Converter

Describe:
100% new and high quality
Color: green, black
Size: Length 2.2cm/0.87in, Width 1.3cm/0.51in
Package Includes:1Pc M.2 Adapter Card
Absolutely test this riser card before delivery. Don’t install it and suspect that the drive is not recognized. The reasons for the fai to recognize the disk can be summarized as follows:
1. The adapter card cannot be inserted into the solid-state hard disk socket of the computer properly. You can use a little force. The customer service of our store encounters many people who say that the disk cannot be recognized. Take a photo to see if it is not inserted all the way, so it will definitely not be recognized.
2. The wrong hard disk is used. Some buyers use the M.2 hard disk with protocol to install it, but it will definitely not work.
3. The system installation disk must use version 10.14 or higher.
4. The partition format of the hard disk is wrong, and it cannot be recognized when installing the system. It must be in the GPT GUID partition format. Be careful not to use any windows system partition to partition the hard disk or the PE system to partition the hard disk, otherwise it will cause trouble for the future installation work! You can use LINUX such as Ubuntu installation disk to partition the hard disk!
5. Do not install the system from the Internet, and do not try to restore the system with your backup, because the disk format of the new and old versions of the Apple system is different!
This adapter card supports 2280 E x4 and E x2 protocol M.2 SSD solid state hard disk conversion to 2013 2014 2015 version Apple MacBook AIR and PRO A1465 A1466 A1502 A1398 computer hard disk. E x4 and x2 M.2 SSDs are divided into AHCI protocol and NVMe protocol. Rookie-level buyers should use e x2 or x4 AHCI protocol hard drives, experienced buyers can use NVME protocol e x4 M. 2 SSD installation, about whether to use AHCI protocol hard disk or NVME protocol hard disk, this is your own technical problem, it has nothing to do with the adapter card! Cainiao buyers are recommended to buy e x4 or e x2 M.2 AHCI SSD to match this adapter card!
It is ant to note that some Apple computers use an adapter card and a solid-state hard disk to rep the Apple hard disk after the 2013 version. After the system is hibernated and then wakes up, it will crash. You need to restart the computer to use it normally. This has nothing to do with the adapter card. It depends on the type of hard disk used. The buyer has confirmed that using Samsung 970 PM961 SM951 and Lexar NM600 will not cause the problem of sleep wake-up and crash, so it is recommended that you try to choose these types of hard disk plus adapter card combination.
If the hibernation function is not disabled, the Apple system enters hibernation, that is, after the blascreen, it needs to be shut down and then turned on to enter the system. After the Windows system wakes up after hibernation, it will automatically restart. Some models have no problem if they use Windows 10.
Note:
1. Please allow 5-10mm differences due to manual measurement, thanks.
2. The actual color of the product may be slightly different from the picture, and the website is caused by various factors such as the brightness of the monitor and the brightness of the light.