LINK1 9608-J VFD Clock Music Audio VU meter Audio spectrum One-piece molding aluminum shellt Adjustable Light Speed with AGC

VFD Dial Clock Operating Instructions：

Describe the details of the selling point above, atctingDedicated VFD large dot matrix display, Resolution 96 X 8Infrared Remote Controller ：· One-piece molding aluminum shell. product size:207mm x 38mm x 24mm.· The brightne of the clock and the brightne of the Audio VU meter can be adjusted 8 levels.· The brightne of the clock can be set to a fixed brightne mode (brightne level 8). Automatic sensormode (real-time adjustment according to the intensity of ambient light) and automatic time mode (set twoperiods, two periods of brightne can be set separately).· Accurate clock display function (Enter this function after 30 seconds without signal input and key-pre operation.)(SD3078 built-in crystal oscillator, the chip can ensure that the clock accuracy is ±3.8ppm (at 25 + 1 degreesCelsius), the Monthly error is le than 10 seconds)· The rising speed and falling speed of the light bar, the holding time and the falling speed of the peak can be adjusted separately.· AGC, In order to ensure that the input signal in a large range of output effect is ideal.· Remote control operation.and providing trust to your potential users.

Specific operation：

I. Normal mode：1.Single ClickPOWER -Enter the closed screen state, any key wake-up.OK -Bottom line display or no in Audio VU meter mode.UP -Switching display effect in Audio VU meter mode.DOWN -Switching display effect in Audio VU meter mode.LEFT -Viewing time and date in any mode.RIGHT -Viewing time and week in any mode.DEC -Brightne decreases（Adjust the brightne of the clock in the clock mode and adjust the Audio VU meter brightne in the Audio VU meter mode）.ADD -Brightne increases（Adjust the brightne of the clock in the clock mode and adjust the Audio VU meter brightne in the Audio VU meter mode）.HOME -Switching clock mode and auto mode.BACK -Return or exit the settings menu.M-KEY - Switch Audio VU L_mode.2.Long Pre onOK - Pre 2 seconds, switch between dB mode and AGC mode in a specific mode (24 segment mode)UP -In the specified Audio VU mode (divided into upper and lower mode), the display width of the VU can be changed by Clicking and then pre long.DOWN -In the specified Audio VU mode (divided into upper and lower mode), the display width of the VU can be changed by Clicking and then pre long.LIST -Pre 2 seconds to enter the VU speed setting mode, Pre 5 seconds to enter the Clock setting mode.BACK -Pre 2 seconds lock or unlock infrared remote control.3. Double-ClickOK -VU Mode change (6 L_mode）UP -Switching display effect in selected mode.DOWN -Switching display effect in selected mode.HOME -In the clock display mode, switching the display font of the clock.BACK -Enter the s-check program, screen all bright.4. Three-ClickOK -Menu effect switch, right -left nsition / up - down nsition /mid folding openUP -Mirroring the display of the left in the selected mode.DOWN -Mirroring the display of the right in the selected mode.HOME -In the clock display mode, switching dial clock display effect.5. Four-ClickOK -Display flipping.6. Five-ClickOK -Clock enable or disable. No longer display clock after disable.II. Speed setting mode：（In normal mode, pre LIST on for 2 seconds to enter, pre BACK on to exit）OK -1. The rising speed of the light bar (15 optional)2. The falling speed of the light bar (15 optional)3. The holding time of the peak (15 optional)4. The falling speed of the peak (15 optional)5. DB calibration (only in the 24 segment mode will this option be available).Loop in these functionsUP -Time increases, Speed decreasesDOWN -Time decreases, Speed increaseIII. Clock Mode：（Cycle display time / date / week）· Clock Display Mode：Single ClickUP -In light perception mode, the brightne of the clock increases the minimum brightne value. (15 optional）(only in Clock Mode)DOWN -In light perception mode, the brightne of the clock decreases the minimum brightne value. (15 optional）(only in Clock Mode)LEFT -Viewing date in any mode.RIGHT -Viewing week in any mode.DEC -The brightne of the clock decreases, Decrease one more level of minimum brightne is the clock brightne automatic sensor mode (automatically adjusting brightne according to ambient light)ADD -The brightne of the clock increase, Increase one more level of maximum brightne is the clock brightne automatic time period mode (can be set for two different periods of brightne)Long Pre onLIST -In the clock display status, pre 2 seconds, enter the Clock Setting Mode.· Clock Setting Mode：（In VU mode, Pre LIST on for 5 seconds to enter, In Clock mode, pre LIST on for 2seconds to enter, pre BACK on for to exit) .Single ClickOK / LIST / LEFT / RIGHT-After entering the time adjustment mode switching year/month/day/hours/min/sec/day display mode /time modeUP -Year/month/day/hours/min/sec increase.DOWN -Year/month/day/hours/min/sec decrease.(Date Mode：YY-MM-DD/MM-DD-YY/DD-MM-YY）(Time mode divided into 12 hours and 24 hours).(In the auto mode of clock brightne, there will be more than 4 setting it, starting time, ending time, brightne in time period, and brightne outside the time interval, for example, setting 23 to 06 brightne level 2, and other time periods brightne level 5.)IV. Other Function Operation：Factory DefaultOK -10 Secondsant notes：(VFD)Vacuum fluorescent display Is the display tube and from the vacuum electronics development, the electrons emitted by the cathode (direct heating type, referred to as filament) and accelerate the control gate, the flow of electrons on the gla subste printed on the electrode and the phosphor anode and grid and a gla lid. It uses electronic impact phosphor to e phosphor glow, it is a kind of s luminous display device。1. Because of the characteristics of VFD, long working brightne will be attenuated, so it will become uneven, is a normal phenomenon。