Koorinwoo 3 in 1 Wireless Anti detectoring Parktronic For Cars Parking r system with Camera Control of Blind Zones

5" Color TFT LCD Car Rearview with 2 video input, works perfectly with car rearview cameras.

With 2 video input port, video cable connects to car rearview camera, the yellow one connects to DVD or VCD.When parking the car, the rearview image appears onto the screen automatically.Designed ith menu ons,the brightne/const/hue/guage is adjustable.Supports car DVD, VCD, camera, and other video equment.Easy installation without dam any parts of the car: just cl on the mirror.Easy installation ,without dam any parts of the car, cl on the mirrorNo Audio input or output.Specifications:Screen Size: 5 inch TFT 16:9 screenDisplay Component: Color TFT-LCDNumber of Dots: 800W * RGB * 480HVideo system: PAL/NTSC compatiblePower supply: DC 12ated power consumption: 3WOperation temperature: -30~+60°Storage temperature: -40~+60°

Parking rs:

1. Rate Voltage: 12V2. Operating Voltage Range: 9~16V3. Rate Current: 20~200mA4. Detecting distance: 0.3 - 2.5m5. Frequency: 40KHz6. Working Temperature: -40~80°C7. Display Working Temperature: -40~60°C

HD Car Rear view Backup Parking CameraWith 2 LED Lights

Images rs: For HD

TV System:NTSC(Default)/PAL

Effective Pixels:NTSC:656(H)×592(V) PAL:628(H)*586(V)

Sensing Area(mm):4.9X3.7

Resolution(TV Lines):680 TV lines

Min IIIumination:0.01 Lux

Video Output:75

S/N ratio:≥48dB

F=1.7 mm waterproof

Angle:170 degree

Operating Temperature:-30°C~+75°C(RH95% Max.)

Storage Temperature:-40°C~+85°C(RH95% Max.)

Wirele module for car re camera that enables normal re camera

This listing is for the wirele module only.only can one camera

Take out your stock plate light at the back of your car.

Fix the camera to where the stock plate light was.

Connect the built-in plate light of the camera to where the stock plate light was connected to get the power

Connect the wirele module () to your camera via the two cables - one plug for AV output and one plug for power

Connect the wirele module () to the re light of your car to get the power - red wire for positive and black wire for negative

Connect the wirele module (receiver) to your car - yellow plug for AV input.

Connect the wirele module (receiver) to your car battery or to get the power - red wire for positive and black wire for negative

You will see the images when your car is in re shift.