Intelligent pulse Repair car battery charger 12V 6A Automatic 12 volt Maintenance-free Dry Water Gel lead acid battery charger

Intelligent pulse Repair car battery charger 12V 6A Automatic 12 volt
The Intelligent pulse Repair car battery charger 12V 6A Automatic 12 volt has designed highly reliable and meet international safety and electromagnetic compatibility requirements.

A:Input Characteristics:

  Input Voltage: 100-240Vac input AC voltage

  Input Frequency: 50Hz or 60Hz and single phase.

B:Output Characteristics:

  Constant Charging Voltage: 14.7V   Float charge 13.8V

C:Charging ModeIntelligent pulse Repair car battery charger 12V 6A Automatic 12 volt

  3 Stages, CC, CV, Trickle

D:Safety Test for battery charger

  Hi-pot Test:15KVac 5mA 3 Seconds between input and output test

  Resistance:The battery charger insulation resistance shall be not less 30M ohms after application of 500Vdc/10mA for 3 Seconds

  Drop test: Height: The battery charger conform to BS EN60068-2-32:1993 TEST ED: free fall appendix B

E:Protection for battery charger

Over Voltage Protection   The battery charger will be auto recovered when faults remove

Over Current Protection   Charger output current does not exceed the set maximum battery charging current.

Over Short Circuit Protection  Battery charger output can be shorted without damage No odor, smoke, fire, plastic deformation, and excessive heal happen. The power shall be auto-recovery. (It will enter into normal condition when then the fault condition is removed)

Over reverse polarity Protection When the battery charger output line reversed after the charger will not work until the right user access only to start.

F:DC Connector Dimension:Intelligent pulse Repair car battery charger 12V 6A Automatic 12 volt

Optional output connector: 3-port Inline, 3-pin XLR, Alligator clip, 3-port House, Coaxial etc.

Special plug: 4-pin XLR, 2-port Inline, 3-pin House, Polarized, 3-port House for Panterra and Grio, Polarized C7 etc