Home Industrial & Scientific Industrial Electrical Controls & Indicators Controllers Thermostat ControllersHumidity Controller/Digital Temperature And Humidity Controller-220v

Humidity Controller/Digital Temperature And Humidity Controller-220v

₦ 12,200

₦ 20,65341%

6 units left

+ shipping from ₦ 1,500 to LEKKI-AJAH (SANGOTEDO)

0 out of 5

(No ratings available)

Promotions

Call 07006000000 To Place Your Order Need extra money? Loan up to N500,000 on the JumiaPay Android app. Enjoy cheaper shipping fees when you select a PickUp Station at checkout.

Report incorrect product information

Delivery & Returns

The BEST products, delivered faster. Now PAY on DELIVERY, Cash or Bank Transfer Anywhere, Zero Wahala!

Choose your location

Pickup Station

Delivery Fees ₦ 1,500

Ready for pickup between 06 May and 08 May if you place your order within the next 12hrs 2mins

Door Delivery

Delivery Fees ₦ 2,500

Ready for delivery between 06 May and 08 May if you place your order within the next 12hrs 2mins

Return Policy

Free return within 7 days for ALL eligible itemsDetails

Seller Information

Kebed-Sea-COD

94%Seller Score

81 Followers

Seller Performance

Shipping speed: Excellent

Quality Score: Excellent

Customer Rating: Good

Product details

Description:
Switch between hot and cold modes;
Control the temperature by setting the temperature setting value and difference value;
Temperature calibration;
Refrigeration control output delay protection;
Alarm when the temperature exceeds the temperature limit or when the sensor has an error.
Product Specification
Front panel size: 75x34.5 (mm)
Mounting size: 71x29(mm)
Product size: 75x34.5x85 (mm)
Sensor length: 1 meter (probe included)
technical parameters
Temperature measuring range: -50 ~ 99 Celsius
Accuracy: 0.1 degree Celsius
Sensor error time: 1 minute
Power supply: DC 12V, DC 24V, AC 110V/220V +10 percentage, 50/60 Hz.
Power consumption: less than 3w
Sensor: NTC sensor (IPC)
Relay contact capacity: cold (10A/220VAC); Heating (10A/220VAC).
Ambient temperature: 0-60 degrees Celsius
Storage temperature: -30-75 degrees Celsius
Relative humidity: 20-85 percent (non-condensing)
KInstructions for use and
1. Parameter display method: When the controller is working normally, press and release the ▲ button once, display the set value of temperature, immediately press and release the ▼ button once to display the set value of temperature difference temperature, 2 seconds return to normal temperature display state
2.Set the parameter method
When the controller is working normally, long press the S button for more than 3 seconds to enter the modified parameter mode,
The indicator light is on and the digital tube displays the F1 code of the first menu item.
Press "▲" or "▲" to scroll the menu item up or down and display the menu code, press "S"
The key displays the setting value of the current menu parameters. Press and hold the "S" key and press and hold the "▲" or "
The key can be adjusted up or down and the current value of the menu setting is displayed, while holding down "S" and "▲".
The key or ▼key can quickly move up or down and display the current menu settings.
When finished, press and release the power button to save the settings change and return to the normal temperature display state.
If there is no key operation within 0 seconds, the parameter change will not be saved and will return to the normal display state.
"Er" is displayed if an error occurs while saving the parameter and returns to normal display state after 3 seconds.
3. Repair system data
When the machine is turned on, please first check whether the parameter settings are normal. If the control is incorrect, it will show ER. Pressing any key at this time will restore the default settings and will operate normally. It is recommended to reset the settings at this time.
Manual
In the normal working state of the controller, press and hold the " " key for 3 seconds to turn off the controller; In the off state of the controller, press and hold the key for 3 seconds to turn on the controller.
In the normal working state of the controller, the screen displays the current temperature value; The controller can also switch the operating mode between heating and cooling.
The controller starts cooling with the cold indicator light on when the measuring temperature ≥ temperature set value + difference value and the cooling relay is connected; The Cold light flashes, indicates that the refrigeration equipment is under the compressor delay protection state; When the measuring temperature less than or equal to the set temperature value, the cold indicator light turns on and the refrigeration relay disconnects.
The system starts heating when the temperature measurement value ≤ the set temperature difference value and the heat indicator lights up and the heat relay connects; When the measuring temperature ≥ the set temperature value, the “heat” indicator light turns off and the heat relay is disconnected.
Menu Instructions
Description error
Sensor Error Alarm: The controller activates the sensor error alarm mode when the sensor is open circuit or short circuit, the whole working state is closed with sound alarms, and the Nixie tube displays "EE", press any key to cancel the alarm sound, the system returns to normal temperature display when the error and fault are cleared.
Alarm when measuring temperature exceeds temperature measuring range: controller activates error alarm function when measuring temperature exceeds temperature measuring range, all working state is closed with sound alarms and the Nixie tube displays “HH”, press. any key to cancel the alarm sound, the system returns to normal temperature display when the error and fault are cleared.
Safety standards
★At risk:
1. Strictly distinguish the sensor branch wire, power wire and output relay interface from each other and prohibit misuse
Connections or relay overload.
2. Dangers: It is prohibited to connect the cable terminals without turning off the electricity.
★Disclaimer:
It is prohibited to use the machine in the environment of overheating, high temperature, strong electromagnetic interference or
Heavy corrosion.
★Note:
1. The power supply must meet the voltage value indicated in the instructions.
2. To avoid interference, the sensor cable and power cord should be kept away.

Specifications

Key Features

Able to control temperature and humidity at the same time
Able to connect to humidification and dehumidification equipment simultaneously.
The heating/cooling function can be set separately for refrigeration and heating to protect the temperature controller from violent changes. Same as humidity control.
Be able to connect to refrigeration/heating and humidifier/dehumidifier equipment simultaneously.
Be able to control temperature and humidity at the same time.
Support temperature and humidity calibration (dual display window) Be able to display the measured temperature/humidity and the set temperature/humidity at the same time