Hollyland LARK1 M2 Wireless Lavalier Microphone Type-C interface version 35H Battery life for iPhone Android Noise Cancellation for Video Recording Streaming Mic

M2 wireless lavalier microphone is the lightest mini microphone on the market. With its lossless sound reproduction and top-of-the-line recording capabilities, it brings you unmatched recording performance. The wireless audio transmission can reach up to 1,000ft line-of-sight range. Perfect for filmmakers, vloggers, and podcasters.

Hi-Fi Studio-Grade Sound Quality

Designed for the Pro, LARK1 M2 microphone features a 48kHz/24bit audio format, capturing every sound with accuracy. With a 70dB signal-to-noise ratio, it ensures excellent audio signals with minimal background noise. Moreover, it can handle a Maximum 115dB Sound Pressure Level, perfect for recording in environments with high-pitched sounds.

Extended 40-Hour Battery Life

With optimized power efficiency, the M2 wireless microphone can work for up to 10 hours (with ENC off). The compact charging case can fully charge the entire set twice, and each charge takes less than 2 hours. With the charging case, the camera version has a battery life of 40 hours. No more worrying about low battery situation.

Smart Control of Noise Cancellation

M2 supports one-click on the yellow button to turn on/off the noise cancellation on the transmitter. On the receiver of the camera version, the indicator lights at the top of the RX will stay green when noise cancellation is on. Enhanced firmware and audio algorithms ensure crystal-clear, rich, and undistorted human voices, even in noisy environments.

Smooth Switch Between Mono & Stereo

The  M2 receiver of the camera version supports two recording modes: mono and stereo. You can switch between them by pressing the Mode Switching & Pairing button on the receiver. Note: The receiver supports switching between mono and stereo modes only when connected to the camera through the 3.5mm audio jack.

Instant Pairing Upon Unboxing

M2 microphone system is pre-paired at the factory, so you won't have to deal with any complex setup procedures. The TX and RX will automatically pair with each other, allowing you to start recording right away. You can easily adjust volume levels on the RX using the intuitive knob. Three LEDs clearly display volume levels, showing the current status.

300m Stable Transmission, Support UAC