This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
Free return within 7 days for ALL eligible itemsDetails
Solid trust stores
94%Seller Score
123 Followers
Shipping speed: Excellent
Quality Score: Excellent
Customer Rating: Good
This is a strong double fortified high polymer rubber Butyl tape. This tape make up a leak instantly. This tap fixes water leakages from the roof, GP tanks and plumbing repairs. This tape is highly recommended for all plumping works and repairs. This tape last up to 30 year and are highly temperature resistant. This aluminum tape will not be destroyed by heat from sun and extreme harsh weather conditions . This tape is easy to use.
just clean the surface around where you want to paste the tape, brush the gap well and tear off covering film and paste the tape. Ensure to press well the tape after pasting to smoothen and remove air trapped. and allow to dry.
It can maintain flexibility and adhesion , can withstand a certain degree of displacement, and has good follow-up to deformation.
This tape ensures instant Waterproof leakage stopper, sealing and chemical resistance, strong anti-ultraviolet (sunlight) ability; long service life.
It is easy to use, accurate dosage, reduce waste, and cost-effective.
It does not contain any solvents, safe and environmentally friendly.
This tape can be used on the overlap between the corrugated iron sheet steel plate and the daylighting cover , and the connection between the pipes of the falling patio
The tape is also excellent on Doors, windows, concrete roofs, and ventilation ducts ensures that they are well sealed and waterproof.
Application method
1) According to the gap between the joints and the requirements of the engineering design, choose a waterproof tape of appropriate specifications.
2) Before pasting, the water, oil, dirt and other impurities on the surface must be completely removed to keep the pasting surface clean.
3) Starting from one end of the head, open the double-sided tape and stick the tape to the overlap of the lower board in a straight line along the seam , and then press the tape from light to heavy by hand to make it firmly with the veneer.
4) Tear off the isolation paper on the upper layer of the tape, press the upper corrugated board of the interface into the joint, and then squeeze
Customers who have bought this product have not yet posted comments