This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
/product/43/4170013/1.jpg?8419)
Share this product
Promotions
Delivery & Returns
Choose your location
Pickup Station
Delivery Fees ₦ 250
Arriving at pickup station between 09 May & 13 May when you order within next 22hrs 48mins
Door Delivery
Delivery Fees ₦ 620
Ready for delivery between 09 May & 13 May when you order within next 22hrs 48mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Seller Information
Ilkco Store
94%Seller Score
50 Followers
Seller Performance
Order Fulfillment Rate: Excellent
Quality Score: Excellent
Customer Rating: Good
Product details
The HG7881 (L9110S) Dual Channel Motor Driver Module is a compact board that can be used to drive very small robots.
This tiny module has two independent HG7881 (L9110S) motor driver chips which can each drive up 800mA of continuous current. The boards can be operated from 2.5V to 12V enabling this module to be used with both 3.3V and 5V microcontrollers.
A set of male header pins is used to connect this module to your robot's microcontroller brain. The motors are attached via two sets of screw terminals.
A PWM Pulse Width Modulation signal is used to control the speed of a motor and a digital output is used to change its direction. This module can also be used to drive a single four line two phase stepper motor. Four holes make this board easy to mount onto your robot or other project.
Motor Control Interface:
| Pin | Description |
|---|---|
| B-IA | Motor B Input A (IA) |
| B-IB | Motor B Input B (IB) |
| GND | Ground |
| VCC | Operating Voltage 2.5-12V |
| A-IA | Motor A Input A (IA) |
| A-IB | Motor A Input B (IB) |
Motor Truth Table:
| IA | IB | Motor State |
|---|---|---|
| L | L | Off |
| H | L | Forward |
| L | H | Reverse |
| H | H | Off |
We recommend applying a PWM signal to input IA to control the motor speed and a digital output to input IB to control its direction.
Note that the actual direction that "forward" and "reverse" turn your motor will depend on how it is oriented and wired. If your motor spins the wrong way, either swap the motor wires that connect to the output terminals or change the way the IA and IB bits get set in your program.
Specifications
Key Features
Motor Control Interface:
| Pin | Description |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
Specifications
- SKU: GE779EA5OGM95NAFAMZ
- Product Line: ilkco
- Weight (kg): 0.1
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
/product/43/4170013/1.jpg?8419)
HG7881 (L9110) Dual Channel Motor Driver Module
₦ 4,000
Questions about this product?