Heavy Duty Battery Jumper Cable - 500Amp

Booster Cable is an electric cable used to connect a discharged battery to a power source for charging.Many motorists carry booster cables. It is a method of starting an automobile or other vehicle powered by an internal combustion engine when the vehicle's battery has been discharged.

Heavy Duty Jumper Cables. Use to jump dead batteries in cars, trucks, generators and more.

Battery line instructions:

A: follow the bonding order:

1. Clip the red chuck in the positive pole of the non-electric vehicle, and then connect the positive pole of the electric vehicle.

2, the black joint first connected with the electric vehicle negative pole, then connected to the electric vehicle engine hook or negative pole.

3. Start the electric vehicle for several minutes, and then start the non-electric vehicle for several minutes. If it is still unable to start, you can put the electric vehicle throttle a little higher, then to start the non-electric vehicle.

4. Remove the bonded emergency line in the same order as the previous one.

B: the black negative chuck should not be directly clamped on the negative electrode of the battery of the non-electric vehicle as far as possible, and should not be connected or close to the place where the engine will move or transfer when it is running.

C: when connecting with the rescue line, you must turn off the lights, heating and cooling switches, sound switches, computer equipment and so on of non-electric vehicles.