H36 Combo High Temperature Resistance Klipper Canbus Tool

₦ 77,319

₦ 150,78049%

1 units left

+ shipping from ₦ 14,281 to LEKKI-AJAH (SANGOTEDO)

0 out of 5

(No ratings available)

Promotions

Call 07006000000 To Place Your Order Need extra money? Loan up to N500,000 on the JumiaPay Android app. Enjoy cheaper shipping fees when you select a PickUp Station at checkout.

Report incorrect product information

Delivery & Returns

Shipped from abroad

Choose your location

Pickup Station

Delivery Fees ₦ 14,281

Ready for pickup between 28 May and 30 May if you place your order within the next 17hrs 28mins

Door Delivery

Delivery Fees ₦ 15,241

Ready for delivery between 28 May and 30 May if you place your order within the next 17hrs 28mins

Return Policy

Free return within 7 days for ALL eligible itemsDetails

Warranty

None

Seller Information

kristinap

86%Seller Score

98 Followers

Seller Performance

Shipping speed: Good

Quality Score: Excellent

Customer Rating: Average

Product details

The product information is as follows:

Name:H36 Combo High Temperature Resistance Klipper Canbus Tool Board Compatible NEMA14/36mm Motor Onboard TMC2209
H36 Combo V1 is a newly designed high temperature tool board running Klipper firmware. Based on STMG0B1T3, the maximum operating temperature can reach 125 degrees Celsius (CAN only). It also provides two communication methods: CANBUS and USB. The onboard USBHUB has up to two USB interfaces (or one CAN and one USB), which can be used to connect to the IDM Scanner Leveling Sensor camera, etc.
STM32G0B1T3 MCU, up to 125 degrees Celsius, supports Klipper Firmware.
6-layer PCB design, all solid capacitors and tantalum capacitors, better heat dissipation.
Onboard IO controlled CAN/USB switch.
Onboard RESET and BOOT0 buttons for easy firmware update.

Fan control/heating both use independent high-power MOS, safer and lower heat generation.
Onboard 5V@3A DC-DC, 5V peak load can reach 15W.
XT30 interface, custom cable comes with the board.
Onboard USB2.0 HUB, 3x USB2.0 interface (one of which is connected to MCU).
Support CAN/USB2.0 connection.
Onboard TMC2209.
3 x 3pin Fans, 3 x IO with level converter, 1 x RGB, 1 x Heat, 1 x thermistor, 1x status LED.
ADXL345 Accelerometer onboard.
USB-C onboard for Firmware update.
Application: Print Head with NEMA14/36mm Motor.
Hardware specification:
Microcontroller:STM32G0B1T3
Accelerometer:ADXL345
USB Port:2 + 1 (For MCU), Powered by CH334P
CANBUS:1 + 1 (For MCU)
Fan:4 (1x2Pin, 3x3Pin)
Heating output: 1
Temperature measurement:1 (PH2.0 connector) + 1 (on board thermistor)
Voltage monitoring:5V,24V
Motor drive:TMC2209
Signal input and output:5 (PH2.0) + 7 (pin header)
RGB light strip control:default 2, up to 5
Aux Board support:No
Onboard mounting nut:No
Note:Due to different production batches, the appearance may vary, but it does not affect the use.
Colour:Black
Material:PCB+Components

Package Contents:
1 * high temperature tool board
1 set * accessories(Accessory colors are multiple, no specification is accepted)

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.