This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeComputingComputersNetworking ProductsNetwork AdaptersPowerline Network AdaptersH-Bridge Motor Driver Nmos With Emergency Brake 5-30V Motor
/product/64/4679604/1.jpg?4907)
/product/64/4679604/2.jpg?4907)
/product/64/4679604/3.jpg?4907)
/product/64/4679604/4.jpg?4907)
/product/64/4679604/5.jpg?4907)
/product/64/4679604/6.jpg?4907)
/product/64/4679604/7.jpg?4907)
/product/64/4679604/8.jpg?4907)
Share this product
₦ 14,823
₦ 25,93643%
1 units left
+ shipping from ₦ 3,344 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees ₦ 3,344
Ready for pickup between 27 June and 01 July if you place your order within the next 22hrs 0mins
Door Delivery
Delivery Fees ₦ 4,304
Ready for delivery between 27 June and 01 July if you place your order within the next 22hrs 0mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Warranty
None
Seller Information
Williame
88%Seller Score
5 Followers
Seller Performance
Shipping speed: Good
Quality Score: Excellent
Customer Rating: Good
Product details
Detailed Information About The Product:
Features: 1. Using Two Half-Bridge Driver Chips + Low-Pass Internal Resistance 55v110a Nmos, the Motor Can Realize Forward and Reverse Rotation.
2. Two Pwm Inputs, the Duty Cycle Can Be Adjusted Within 0-99%, with Instant Braking Capability!
3. Working Voltage 5v-30v, Power Below 170w.
4. the Control is Extremely Simple and Convenient, Only 3 Input Lines are Needed to Control the Motor. Supports 5v and 3.3v Logic Input, Suitable for Direct Control of Io Ports of Various Types of Microcontrollers.
5. the Chip Has Built-In Dead Zone Hardware Control, Which Can Better Adapt to Frequent Commutation and Reduce the Loss of the Tube Itself. the Back of the Module is Tin-Plated, Allowing the Wires to Carry Greater Current.
Description:
1. Interface description:
VIN: positive pole of power supply;
GND: negative pole of power supply;
12V: 12V output port
MOT+, MOT-: motor output interface
EN: Enable terminal, active at low level
IN1: Logic input 1
IN2: Logic input 2
2. Instructions for use:
PWM speed control:
IN1=PWM pulse (0-99%); IN2=0; Forward rotation speed is adjustable;
IN1=0; IN2=PWM pulse (0-99%); reverse rotation speed is adjustable;
IN1=0; IN2=0; motor braking;
Tips: Each time the module is powered on, there needs to be a falling edge before the control terminal is set to 0, that is, it is first pulled high and then pulled low. It is recommended to use microcontroller control. Due to the bootstrap capacitor scheme, the PWM duty cycle cannot reach 100%, and the control terminal cannot be directly connected to 1.
(Different batches may have differences in product appearance, color, and printing, which do not affect use)
size: 38.8mm x 67.5mm
Material: PCB
colour: As shown
Package Contents:
1 x Motor Module
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Features: 1. Using Two Half-Bridge Driver Chips + Low-Pass Internal Resistance 55v110a Nmos, the Motor Can Realize Forward and Reverse Rotation.
2. Two Pwm Inputs, the Duty Cycle Can Be Adjusted Within 0-99%, with Instant Braking Capability!
3. Working Voltage 5v-30v, Power Below 170w.
4. the Control is Extremely Simple and Convenient, Only 3 Input Lines are Needed to Control the Motor. Supports 5v and 3.3v Logic Input, Suitable for Direct Control of Io Ports of Various Types of Microcontrollers.
5. the Chip Has Built-In Dead Zone Hardware Control, Which Can Better Adapt to Frequent Commutation and Reduce the Loss of the Tube Itself. the Back of the Module is Tin-Plated, Allowing the Wires to Carry Greater Current.
Description:
1. Interface description:
VIN: positive pole of power supply;
GND: negative pole of power supply;
12V: 12V output port
MOT+, MOT-: motor output interface
EN: Enable terminal, active at low level
IN1: Logic input 1
IN2: Logic input 2
2. Instructions for use:
PWM speed control:
IN1=PWM pulse (0-99%); IN2=0; Forward rotation speed is adjustable;
IN1=0; IN2=PWM pulse (0-99%); reverse rotation speed is adjustable;
IN1=0; IN2=0; motor braking;
Tips: Each time the module is powered on, there needs to be a falling edge before the control terminal is set to 0, that is, it is first pulled high and then pulled low. It is recommended to use microcontroller control. Due to the bootstrap capacitor scheme, the PWM duty cycle cannot reach 100%, and the control terminal cannot be directly connected to 1.
(Different batches may have differences in product appearance, color, and printing, which do not affect use)
size: 38.8mm x 67.5mm
Material: PCB
colour: As shown
Package Contents:
1 x Motor Module
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Specifications
Key Features
- Motor Module
- Driver Module
- Bridge Module
- Power Module
- Module
What’s in the box
1 x Motor Module
Specifications
- SKU: GE779EA7OJ5RSNAFAMZ
- Model: Motor Module
- Production Country: China
- Size (L x W x H cm): 8.5×8×2
- Weight (kg): 0.046
- Color: As Shown
- Main Material: PCB
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
/product/64/4679604/1.jpg?4907)
H-Bridge Motor Driver Nmos With Emergency Brake 5-30V Motor
₦ 14,823
₦ 25,93643%
Questions about this product?
