GY-VL53L0XV2 Time Of Flight ToF Laser Distance Measurem

Features:

• 
  The VL53L0X is a time-of-flight ranging
  system integrated into a compact module. This board is a carrier for the
  VL53L0X, so we recommend careful reading of VL53L0X datasheet before using this product.
  
• 
  The VL53L0 uses flight sense technology to
  precisely measure how long it takes for emitted pulses of infrared laser light
  to reach the nearest object and be reflected back to a detector, so it can be
  considered a tiny, self-contained lidar system.
  
• 
  This time-of-flight (TOF)
  measurement enables it to accurately determine the absolute distance to a
  target without the object's reflectance greatly influencing the measurement.
  
• 
  The sensor can report distances of up to 2 m (6.6 ft) with 1 mm resolution, but
  its effective range and accuracy (noise) depend heavily on ambient conditions
  and target characteristics like reflectance and size, as well as the sensor
  configuration. (The sensor's accuracy is specified to range from ±3% at best to
  over ±10% in less optimal conditions.)
  
• 
  Ranging measurements are available through
  the sensor's I2C (TWI) interface,
  which is also used to configure sensor settings, and the sensor provides two
  additional pins: a shutdown input and an interrupt
  output.
  
• 
  The VL53L0X is a great IC, but its small,
  leadless, LGA package makes it difficult for the typical student or hobbyist to
  use.
  
  
• 
  It also operates at a recommended voltage of 2.8 V, which can make
  interfacing difficult for microcontrollers operating at 3.3 V or 5 V. Our
  breakout board addresses these issues, making it easier to get started using
  the sensor, while keeping the overall size as small as possible.
  

PIN Description:

VDD Regulated 2.8 V output. Almost 150 mA is available to power external
components. (If you want to bypass the internal regulator, you can instead use
this pin as a 2.8 V input with VIN disconnected.)

VIN This is the main 2.6 V to 5.5 V power supply connection. The SCL and SDA
level shifters pull the I2C lines
high to this level.

GND The ground (0 V) connection for your power supply. Your I2C control source must also share a common ground
with this board.

SDA   Level-shifted I2C data
line: HIGH is VIN, LOW is 0 V

SCL     Level-shifted I2C clock
line: HIGH is VIN, LOW is 0 V

XSHUT   This pin is an active-low shutdown input; the board pulls it up to VDD
to enable the sensor by default. Driving this pin low puts the sensor into
hardware standby. This input is not level-shifted.

Package Includes:

 1x
GY-VL53L0XV2V L53L0X Time-of-Flight Distance Sensor

.wang-edit-text{
font-family:'Arial' !important;
}
.wang-edit-text table {
border-top: 1px solid #000;
border-left: 1px solid #000;
}
.wang-edit-text table td,
.wang-edit-text table th {
border-bottom: 1px solid #000;
border-right: 1px solid #000;
padding: 3px 5px;
}
.wang-edit-text table th {
text-align: center;
}