Geekworm NA Gemini 2.5 V2.0 Dual 2.5" SATA HDD/SSD NAS Case With PWM Fan,RAID,Safe

Update!!!

On Dec. 1st, 2022, NA Gemini 2.5 is updated to NA Gemini 2.5 V2.0 !

Note:

The Raspberry Pi board, 2.5" SATA SSDs/HDDs, power adapter are all not included in the packing list.

Metal casing will cause the lo of 2.4G wifi signal, we only recommend you to use Ethernet or 5G WiFi .

Support Max 7mm thickne heatsinks on Raspberry Pi 4 as we use 11mm height spacers for the fan with bracket installation on Pi4.

Support Max 16mm thickne 2.5" SATA HDD/SSD installation. Recommend to use HDDs.

Insert the SD card into Raspberry Pi 4 first before NA-Gemini 2.5 installation start.

New SSD/HDD must be formatted before use. Older SSD drives with le efficient flash media may not perform as well as newer drives.

[User Manual]

WiKi: https://wiki.geekworm.com/NA_Gemini_2.5

Installation Video: https://youtu.be/7FzZeoTBQiI

RAID Setting: https://wiki.geekworm.com/NA_Gemini#Raid_Setting

[Overview]

Geekworm NA-Gemini 2.5 is an ultra-compact dual 2.5 inch SATA HDD/SSD NAS storage kit for Raspberry Pi 4 8GB/4GB/2GB.

NA-Gemini 2.5 with RAID, PWM fan, safe shutdown and auto power on function, it allows 2 pcs 2.5" HDDs/SSDs to working at the same time with your Raspberry Pi 4. Also support use with one single 2.5" SATA HDD/SSD.

NA-Gemini 2.5 is composed of 3 parts: X882 dual 2.5" SATA HDD/SSD shield , NA-Gemini 2.5 metal case and cooling solution X823-A3(3Pin 4010 PWM fan with metal bracket) . To get better heat diipation of NA-Gemini 2.5, it also support install max 7mm thickne heatsink above Pi4.

[Operating System]

All Raspberry Pi operating syst

Note: If the OS such as Home Aistant does not allow the installation of external scripts, then the software safe shutdown and automatic adjust fan speed functions are not supported;

[Features]

Ultra-compact NAS storage solution for Raspberry Pi 4 with Dual 2.5" SATA HDD/SSD

Supports D ual Max 16mm thickne 2.5" SATA HDDs/SSDs working at the same time

Support use with one single 2.5" SATA HDD/SSD

Support Auto Power On function by jumper setting (Automatically turn on when power applied)

Integrated Software & Hardware safe shutdown function on X882

With on-board power on to control power on/off

Using PWM fan , can support automatic adjustment of speed according to CPU temperature

Support RAID Modes by jumper setting

UASP supported only, do not support TRIM

LED blue indicator (HDD1,HDD2) indicates each drive status

Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying

[Cooling Solution]

Using PWM cooling fan, can automatic adjustment of speed according to CPU temperature, shell script is required.

Support Max 7mm thickne heatsinks installation on Raspberry Pi 4 as we use 11mm height spacers for the fan with bracket installation on Pi4.

[Power Supply Requirement]

Via DC5521 Jack of X882, 6-18Vdc +/-5% , ≥4A (DC5525 Jack is compatible with DC5521, also support PSU with DC5525 Jack)

Note about PSU:

Pls use high quality power adapter, or may not recognize the HDD/SSD. Since NA-Gemini 2.5 can install two pcs 2.5 inch hard drives, it needs a high-quality power supply to provide enough current.

[FAQ]

: Why only one SSD/HDD is recognized?

A: You found only SSD/HDD if you select the RAID0/RAID1 mode.

Please exit the RAID mode and check again ar entering the PM mode(clear raid mode) .

More details please refer to Set CLEAR RAID mode of RAID setting.

[Packing List]

Bundle 1: NA-Gemini 2.5 V2.0

1 x X882 V2.0 Dual 2.5'' SATA HDD Shield

1 x NA-Gemini 2.5 Metal Case

1 x 3pin 4010 PWM fan with metal bracket

1 x screws pack acceories

Bundle 2: NA-Gemini 2.5 V2.0 + PSU-EU Plug

1 x X882 V2.0 Dual 2.5'' SATA HDD Shield

1 x NA-Gemini 2.5 Metal Case

1 x 3pin 4010 PWM fan with metal bracket

1 x screws pack acceories

1 x DC 12V 5A 60W power adapter with EU plug

Bundle 3: NA-Gemini 2.5 V2.0 + PSU-US Plug

1 x X882 V2.0 Dual 2.5'' SATA HDD Shield

1 x NA-Gemini 2.5 Metal Case

1 x 3pin 4010 PWM fan with metal bracket

1 x screws pack acceories

1 x DC 12V 5A 60W power adapter with US plug

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.