This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
Shipped from abroad
Free return within 7 days for ALL eligible itemsDetails
MOMONIYA
90%Seller Score
26 Followers
Shipping speed: Good
Quality Score: Excellent
Introduction
The NanoPi NEO3 is another fun board developed by FriendlyELEC for makers, hobbyists and fans.
Hardware Spec
Software Feature
Hardware Spec
OS Support
FriendlyWrt 19.07-snapshot Ubuntu Core 18.04 (64-bit)(Linux-5.4 + U-boot-2017.11)
CPU:
Rock RK3328, Quad-core 64-bit high-performance Cortex A53
DDR4 RAM:
1GB/2GB 32-bit DDR4
USB Host:
1x USB3.0 Type A and 2x USB2.0 on 2.54mm pin header
Key
User Key x 1
microSD Slot:
MicroSD x 1 for system boot and storage
GPIO:
2.54mm pitch 26 pin-header, include I2C, UART, , , GPIO
Serial Debug Port:
2.54mm pitch 3 pin-header, 115200bp
LED:
Power LED x 1, System LED x 1
PCB Dimension:
48 x 48mm
Power:
5V/1A, via Type-C or GPIO
Working temperature:
-20℃ to 70℃
Get Started 3.1 Eentials You NeedBefore starting to use your NanoPi NEO3 get the following it ready
NanoPi NEO3
MicroSD Card/TF Card: Cla 10 or Above, minimum 8GB SDHC
TYPC-C 5V/2A power adapter
A host computer running Ubuntu 16.04 64-bit system
3.2 TF Cards We TestedTo make your NanoPi NEO3 boot and run fast we highly recommend you use a Cla10 8GB SDHC TF card or a better one. The following cards are what we used in all our test cases presented here:
SanDisk TF 8G Cla10 Micro/SD High Speed TF card:
SanDisk TF128G MicroSDXC TF 128G Cla10 48MB/S:
川宇 8G C10 High Speed cla10 micro SD card:
[Tech-support]
Wiki: https://youyeetoo.com/blog/
Forum: bbs.youyeetoo.com
ExpertSupport: support@smartfire.cn
About shipping
Customers who have bought this product have not yet posted comments