For HappyModel EP1 RX 2.4G ExpressLRS ELRS Nano Receiver Fo

₦ 25,888

₦ 49,69648%

Few units left

+ shipping from ₦ 6,030 to LEKKI-AJAH (SANGOTEDO)

0 out of 5

(No ratings available)

Promotions

Call 07006000000 To Place Your Order Need extra money? Loan up to N500,000 on the JumiaPay Android app. Enjoy cheaper shipping fees when you select a PickUp Station at checkout.

Report incorrect product information

Delivery & Returns

Shipped from abroad

Choose your location

Pickup Station

Delivery Fees ₦ 6,030

Ready for pickup between 02 July and 04 July if you place your order within the next 22hrs 58mins

Door Delivery

Delivery Fees ₦ 7,030

Ready for delivery between 02 July and 04 July if you place your order within the next 22hrs 58mins

Return Policy

Free return within 7 days for ALL eligible itemsDetails

Warranty

None

Seller Information

JG-krystlel

74%Seller Score

43 Followers

Seller Performance

Shipping speed: Good

Quality Score: Poor

Customer Rating: Excellent

Product details

Detailed Information About The Product:

Bind procedure: 1. Supply power to the EP1 rx, wait until the LED on the RX is off, immediately turn off the power, and then repeat again the above steps. When the RX is powered on for the third time, the LED light will start to double-flash, which means that the RX enters the binding mode
2. Insert the ES24TX module or other DIY 2.4G ELRS TX to Radio transmitter, and choose External RF mode to CRSF protocol, then you can find ELRS menu from the Radio systems(Need to copy the ELRS.LUA file to the SD-Card tools first), Enter into ELRS and press [Bind], the LED on the RX module will getting to be solid if bind successfully.
3. Receiver LED status meanings: EP1 RX: LED solid means bind successful or Connection established; LED double-flash means in bind mode; LED flash slowly means no signal connection from the TX module; LED flash fast means in WIFI hotspot mode, you can connect the WIFI of the RX and upgrade firmware of the RX via visit 10.0.0.1(pas :expresslrs)

EP1_RX
Type: ISM
ESP8285 MCU
SX1280IMLTRT RF Module
Omnidirectional antenna
Frequency Range: 2400 MHz to 2500 MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz
Working voltage: 5v
Weight: 0.42gram(without antenna)
Dimension: 10mm x 10mm x 6mm
Peak gain: 2.23dB
Material: PCB
colour: black

Package Contents:
1 x Receiver

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.