Detailed Information About The Product:
FNIRSI-2C53P is a three-in-one dual-channel model launched by FNIRSI with comprehensive functions and high practicality, targeting people in the maintenance and R&D industries. Word oscilloscope. This device has three major functions: oscilloscope, multimeter and signal generator. The oscilloscope adopts FPGA+MCU+ADC hardware architecture and has
It has a sampling rate of 250MS/s, an analog bandwidth of 50Mhz, a built-in high-voltage protection module, and supports a maximum peak voltage measurement of ±400V; supports waveform screenshots.
Save and view to facilitate secondary analysis. The multimeter function is 4 and a half digits and 19999 points of true RMS, supporting AC and DC voltage and current measurements, capacitance, resistance,
With measuring functions such as diode, continuity, temperature, etc., it is an perfect multi-functional instrument whether used by professionals, factories, schools, enthusiasts or families. Inside
Set up a DDS function signal generator, which can output 12 kinds of function signals. The maximum output of the signal generator is 10MHz, with a step of 1Hz; output frequency, amplitude, and duty cycle
Adjustable. It uses a 4.3-inch 480*272 resolution touch display and a built-in 4000mAh rechargeable lithium battery with a standby time of up to 4 hours. With small size
Provide users with more and stronger practical functions, while also having good portability.
Parameters:
Screen size & resolution:4.3 Inch (480*272 pixels)
Screen material:Surface tempered glassSurface tempered glass + touch screen made of glass GLASS + IPS color screen
BacklightBacklight brightness can be set
Power supply:TYPE-C(5V/2A)
Battery:4000mAh lithium battery
Language: Chinese, English, French, German, Spanish, Portuguese, German, Portuguese
Material: ABS
colour: Black
Package Contents:
1 x 2C53P 2CH Touchable Oscilloscope
2 x P6100 Probe
1 x Multimeter probe
1 x Alligator clip probe
1 x Data cable
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.