FG‑100 DDS Function Generator Sine Frequency 1HZ‑500KHz Cou

Feature:
1. Due to the high precision and stable frequency of the DDS, it is also very suitable for the oscilloscope's scan time calibration factor.
2. The square wave output is also suitable for oscilloscope attenuators and probe pulse adjustment.
3. The main output waveform are sine wave and square‑wave, triangular wave, sawtooth wave.
4. Have a filter (can be turn on/off ) to suit the output of sine wave and pulse wave.
5. Small size, multiple functions, simple operation, easy to carry.
6. Made of high quality material, durable and practical to use.
Specification:
Item Type: Function Generator
Material: ABS
Color: As shown in the picture
Frequency Range: Sine wave 1Hz~500kHz (Magnitude is flat up to 200kHz, above 200kHz, the magnitude may drop as frequency increases), other waveforms 1Hz-20kHz with good phase noise and small distortion, if you don’t care the phase noise and distortion, it can output full frequency range.
Resolution: 1Hz
Output Waveforms: Sine wave, square wave, triangular wave, forward sawtooth wave, reverse sawtooth wave.
Sinewave Distortion: 1% (frequency =1kHz)
Output Amplitude: Maximum ±10V(P-P).
Output Impedance: 50 ohm
DC Offset: Maximum ±10V, can be disabled
Internal Filter: For sinewave or pulse, can be turn on/off
Power Supply: DC3.5-10V. DC 5V adaptor or 3.7V Lithium battery is recommended.
Weight: Approx.172g/6.1oz
.
Package List:
1 x Function Generator 1 x USB Cable1 x Instruction Manual
Note:
1. Please allow 1‑2cm error due to manual measurement. Thanks for your understanding.2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.3. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

Feature:

1. Due to the high precision and stable frequency of the DDS, it is also very suitable for the oscilloscope's scan time calibration factor.
2. The square wave output is also suitable for oscilloscope attenuators and probe pulse adjustment.
3. The main output waveform are sine wave and square‑wave, triangular wave, sawtooth wave.
4. Have a filter (can be turn on/off ) to suit the output of sine wave and pulse wave.
5. Small size, multiple functions, simple operation, easy to carry.
6. Made of high quality material, durable and practical to use.

Specification:

Item Type: Function Generator
Material: ABS
Color: As shown in the picture
Frequency Range: Sine wave 1Hz~500kHz (Magnitude is flat up to 200kHz, above 200kHz, the magnitude may drop as frequency increases), other waveforms 1Hz-20kHz with good phase noise and small distortion, if you don’t care the phase noise and distortion, it can output full frequency range.
Resolution: 1Hz
Output Waveforms: Sine wave, square wave, triangular wave, forward sawtooth wave, reverse sawtooth wave.
Sinewave Distortion: 1% (frequency =1kHz)
Output Amplitude: Maximum ±10V(P-P).
Output Impedance: 50 ohm
DC Offset: Maximum ±10V, can be disabled
Internal Filter: For sinewave or pulse, can be turn on/off
Power Supply: DC3.5-10V. DC 5V adaptor or 3.7V Lithium battery is recommended.
Weight: Approx.172g/6.1oz

.wang-edit-text{
font-family:'Arial' !important;
}
.wang-edit-text table {
border-top: 1px solid #000;
border-left: 1px solid #000;
}
.wang-edit-text table td,
.wang-edit-text table th {
border-bottom: 1px solid #000;
border-right: 1px solid #000;
padding: 3px 5px;
}
.wang-edit-text table th {
text-align: center;
}

Package List:

1 x Function Generator 1 x USB Cable1 x Instruction Manual

Note:

1. Please allow 1‑2cm error due to manual measurement. Thanks for your understanding.2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.3. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.