F11-2 Wireless Microphone Dual Transmitter 3-in-1 Type-C Lightning 3.5mm Set

Designed for mobile vlogging, field interviews, live streaming, and content creation, this wireless microphone system features two clip-on transmitters paired with a 3-in-1 universal receiver. The system operates on a 2.4GHz digital wireless transmission frequency, maintaining low audio latency and stable line-of-sight sound recording. Each transmitter includes an omnidirectional microphone capsule equipped with an integrated DSP intelligent noise reduction chip and furry wind muffs to capture 360-degree vocal audio while filtering out surrounding ambient background noise. The included 3-in-1 receiver features integrated Type-C, Lightning (iPhone), and 3.5mm AUX connector plugs, enabling direct connection to Android devices, iPhones, iPads, DSLR cameras, laptops, and portable speakers without requiring extra adapters. Built with internal rechargeable batteries, the system provides up to 8 hours of continuous operation on a single charge. The transmitters feature digital status display screens, clip-on mounts, and physical control buttons for volume adjustment, mute, and noise reduction modes.

GUIDE TO PROPER USAGE

1. Charge both microphone transmitters and the receiver fully using the included Type-C cable before first operation.
2. Plug the 3-in-1 receiver directly into your device's charging port (Type-C or Lightning) or 3.5mm microphone audio input jack.
3. Press and hold the power button on the transmitters to turn them on; the system will pair automatically with the receiver.
4. Attach the furry windscreen muff to the top microphone capsule when recording in outdoor or windy environments.
5. Clip the transmitter onto clothing approximately 15-20 cm below the speaker's mouth for optimal vocal clarity.

SAFETY NOTE

1. Do not expose the microphone transmitters, receiver, or charging ports to water, rain, or heavy moisture.
2. Do not attempt to open or disassemble the internal casing or battery components.
3. Avoid leaving the system inside vehicles exposed to high heat or direct sunlight for prolonged periods.
4. Use standard certified 5V/1A or 5V/2A charging adapters to prevent battery degradation and internal circuit damage.
5. Store all components inside a dry pouch or case when not in use.