Evaluation Kit For Raspberry Pi Pico 2 W Microcontroller Bo

Detailed Information About The Product:

Pico 2 W Evaluation Kit: This kit includes Pico-LCD-1.3, Pico-10DOF-IMU and Pico-Dual-Expander, etc. Simply connect the Pico 2 W and these two Pico HAT to the GPIO expander board, you can quickly set up a fully functional evaluation platform and start your innovation journey.
For Raspberry Pi Pico 2 W is a low-cost, high-performance microcontroller board with flexible digital interfaces.
Upgraded hardware from Pico 2 with wireless communication, onboard antenna, features 2.4GHz 802.11n WIFI and Bluetooth 5.2.
Development board uses RP2350 microcontroller chip designed by Raspberry Pi.
Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz

Onboard Infineon CYW43439 wireless chip, supports WIFI 4 wireless and Bluetooth 5.2
520KB of SRAM, and 4MB of on-board Flash memory
Castellated module allows soldering direct to carrier boards
USB 1.1 with device and host support
Low-power sleep and dormant modes
Drag-and-drop programming using mass storage over USB
26 x multi-function GPIO pins
2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels
Temperature sensor
12 x Programmable I/O (PIO) state machines for custom peripheral support
USB cable color is multiple, No specification accepted
Different batches may cause differences in printing/appearance, which will not affect the use; the actual product may have color differences due to different lighting or display
Material: PCB+components+plastic
Color: as shown

Package Contents:
1 x Development Board (yellow pin headers soldered)
1 x LCD Screen
2 x Expansion Board
1 x Breadboard
1 x USB Cable
1 x Breadboard Cable
3 x Dupont Cable
4 x Anti-slip Rubber Particles
1 x Acrylic Shell + Screw Kit

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.