Energy Power Meter Digital Display Voltage Ammeter 100A 3P

Main technical indicators

• Measurement accuracy: 1% ± 2 words
• Display: Voltage display 4-bit red 0.31-inch LED digital tube, current and time accumulation display 5-bit, red 0.31-inch LED digital tube active power, electric energy (electricity) display 5-bit, green 0.31-inch LED digital tube
• Measuring current less than 100A current display resolution 0.01 A measuring current greater than 100A current display resolution 0.1 A automatic range conversion
• Active power: (measured voltage AC80.0-300.0 V) 0.0-30000W
• Electric energy: 0.000-99999kWh, decimal point automatic conversion
• Time accumulation: 0.00-999.59 h
• Power factor: 1.000-0.000
• Measure speed: Approximately 2 times per second
• Width by mount: = 3P air switch position occupied by instrument (DZ47/C45)
• Dimensions of instrument protrusion: 54 (length) *45* (width/height) *16 (thickness/depth) mm
• Installation: Rail type (market general guide rail) Note: Shipment is not accompanied by guide rail
• Built-in transformer: the conductor of the measuring loop passes through the round hole on the right side of the instrument (the diameter of the round hole is 11MM, which can pass through the national standard 12 square (mm) copper wire/can load current 100A)
• Note: The load passing through the round hole of the instrument from above or below does not affect the measurement accuracy of the instrument
• Extreme work
• Working temperature:-10 ~ + 60 ℃
• Working humidity: 10 ~ 80% (no condensation)
• Working pressure: 80 ~ 106kPa
• Sunlight exposure: no direct exposure