Electronic Body Pulse Massager Acupuncture Digital Machine

Description:
It not only has the function of acupuncture, thump, massage, cupping, slimming, but also has unique immune regulating function, and the medical physical therapy electrodes, which make the therapy effect more wonderful. It is suitable for whom is lack of sleep, has hypertension, has the cervical pain. The massager based on the physics, bionics, biological electrical, traditional Chinese medicine science of channels and collaterals principle.

Features:
The electronic pulse promotes your blood circulation, relieves your pain and promotes your metabolism.
Usage: Switch knob, clockwise direction to start, increa
Fourth, use a damp towel to wipe the area of skin on which you will be affixing the pads to remove any oil, cosmetic or dirt.
Fifth,should the electrode pads be soiled, both their adhesiveness and the number of times of possible use will be reduced.
Sixth, apply the electrode pads to the area of the body you wish to massage. The unit can't operate unless both pads from at least one change are applied.

Button description: total 13 buttons
1."Shoulder" button: suit for massage on shoulder and back. Press speed "+" or "-" button to adjust the intensity. And speed is automatically reduced or increased. It takes 30 minutes to complete a full treatment. Transfer mode per 5 minutes.
2."Waist" button: designed for waist massage. Waist massage state will be shown on screen. And change mode per 5 minutes. Press speed "+" or "-" but





11."Vibrate" button: press it to start to vibration massage.
12."Rub" button: press it to start to rub massage.
13."Press" button: press it to start to press massage.
14.On or off: turn on the button to start the device, turn off to stop working. There are 8 grades for electronic intensity.

Trouble shooting:
Problem check and remedy.
No stimulation at all.
1.Are the pads and the cord connected properly?
Check the connection to make sure it is correct.
2.Are the electrodes set properly?
See before instructions on how to set them properly.
3.Have the batteries run down?
If so, replace them with new one.
4.Are the batteries installed properly?
See before instructions on how to insert them properly.

The display and treatment mode light up but there is no stimulation.
1.Are the electrodes set properly?
The power to the connected channel automatically turns off approx. 10 seconds if one of the two electrode pads is removed from the skin. Therefore, set them closely to your skin.
2.The intensity level is at what position？
Press on the intensity control button and stop at a point where there is moderate stimulation.
3.Are the electrode pads overlapping?
Affix the pads so that they do not overlap in any way.

Skin turns red.
1.Is the treatment time too long?
Limit your treatment time to 10 - 15 minutes.
2.Have the pads dried?
Wet the surface of the pads and try again. If that does not solve the problem of if the pads are quite soiled, replace them with new one.
3.Are the pads affixed firmly?
Set them so that they fit closely to your skin.

People who suffer from any of the following diseased should not use the electrode pulse.
Showing any symptoms should not use the electrode pulse
Massager for low- frequency treatment:
1.Heart disease
2.Users of pacemakers
3.High fever
4.Acute ( painful ) diseases
5.Abnormal blood pressure