Electric Skateboard Single Drive Remote Controller Longboa

Detailed Information About The Product:

Name：Electric Skateboard Single Drive Four-Wheel Skateboard Remote Controller Motherboard Motor Wheel Hub Longboard Parts
1. Four kinds speed modes to choose, four kinds brake force modes selected. Downhill, slide, braking energy recovery, one key forward/reverse switching wireless 2.4G, multi‑point FM. Voltage 6s,7s,10s, battery pack, rated current 16A maximum each motor.
2. Low speed high torques, low speed, fast acceleration, maximum continuous phase current 80A wheel hub 90 motor 3000rpm, maximum 50km/h.
3. Made of high quality plastic material, sturdy, durable and long service life. Condition: 100% product New
4. Item Type:Single Drive Controller;Single Drive Controller ESC:Rated Voltage:36V;Current:12A;Power:430W(36V);Drive Method:FOC;Induction Mode:For Hall;Maximum Load Bearing:120kg;Protection:Overpressure,Underpressure,Overheat,Stall,CW/CCW,Overflow,Speed Control;Product Category:Pedal Scooter;Suitable People:Universal;Remote Control Battery:Built-in Lithium Battery;Capacity:400MAH;Rated Current:16A;Speed mode:low Speed,medium Speed,high Speed,motion mode;Brake strength: electronic brake
5. Positive and negative switching: Touching button to switch the positive and negative directions;2.4G wireless: 2.4G remote control transmission controls multiple frequency points. Automatic frequency hopping prevents conflicts;Electric quantity instruction: Remote control LED instruction 4 grids scooter electric quantity,10%,25%,50%,75%;Pairing method: When the machine is on, long press the power switch 5S, and the LED indicator flashes once for 0.5s to enter the pairing mode

Using range:Brushless electric controller can be used in the driving control system of electric four-wheel scooter to match the motor 70.83.90.100.120 hub motor.Matching remote control mode: The motherboard is paired with the remote control.There is a button switch on the motherboard.When the mainboard is powered on,briefly press the switch and the LED light beside it flashes for 0.5s once,the motherboard enters the pairing state,and waits for the remote control to be paired.The remote control turns on the power,and short press the hiding button at the bottom of the remote control,and the pairing successful;Matching method of remote control for scooter products:When the finished scooter is powered on,long press the power button and the LED flashes once for 0.5s,the motherboard enters the matching state,and waits for the remote control to be matched.The remote control turns on the power,and press the hiding button at the bottom of the remote control.Press the button,and the matching successful;Display screen remote control matching mode:After the main board of the scooter enters the matching mode,the two buttons of the remote control of the display screen are pressed at the same time,and the matching successful.
colour: black
Material: plastic
Size: Glue shell size 88x55mm, main board size 35x20mm

Package Contents:
1 x Glue-filled single drive
1 x Electronic display
1 x switch
1 x usb cable
1 x remote control

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.