Dual Port Solid-State To Serial Port Adapter Board 2 * M.2 To 3.0 Expansion Card To USB External Cable

Hello dear friend, welcome to our store. Wishing you a pleasant shopping experience!

Product Description

Can simultaneously insert 2 hard drives

But only one can be read at a time

2 starts working after the switch is turned upwards

1 starts working after the switch is turned down

Note that the switch position must be consistent with the hard drive you want to read.

For example, if you turn the switch to the nf2 position to read nf1, you will definitely not be able to read it!!

Supports hard drives: protocol hard drives in m.2

be careful!!! M.2 hard drives that do not support nvme -e protocol use!!!

User question 1: Can the two hard drives installed be of different brands

Answer: Two different brands of hard drives can be used.

User question 2: Is it possible to use only one hard drive slot

Answer: You can use only one hard drive. When using, be sure to turn the switch to the corresponding position

User question 3: Will it affect the nsmission speed

Answer: The theoretical speed limit of hard drives is 6Gbps, and the compatibility between different brands, models, and computer devices varies. As a result, the actual nsmission speeds vary. So there is no standard answer to this, you can try it yours

User question 4: Is it possible to install and use an easy drive cable and hard drive case by ones

Answer: Since the adapter card does not have a chip, there is no compatibility issue with the adapter card. It mainly depends on the compatibility between devices with chips and other components to ensure their usability. The main control chip used for the easy drive cable in our link has been d and found to have good compatibility. Compatible with most devices, recommended for use in combination;